How to Guide

USER MANUAL
1
4
3
2
5
8
7
6
The Smart Cube Stereo Shutter
mini Bluetooth® speaker is
small in size, but a powerful
multi-functional device. It
supports Bluetooth® music
playing in stereo, Bluetooth®
handsfree phone call functions,
Remote Shutter Button for your
smart device’s camera and
comes with a lanyard and jack
pin to attach to your device.
Contents
2x Smart Cube Stereo Shutter
1x USB Cable
2x Lanyard
1x Instruction Manual
Features
● Size 26.8 x 26.8 x 28.5mm
[1.05 x 1.05 x 1.12 inches]
● Bluetooth® handsfree phone call functions
● Lanyard and jack pin to attach to device
● Bluetooth® stereo music playing
● Bluetooth® Remote Shutter Button
● Siri and Google Now access
EASY OPERATION
1. Push Button: Power/Play/
Pause/Answer Calls
● Press and hold the Push Button on both
cubes to power On/Off.
● Short Press the button to Pause when music
is playing.
● Press the button to answer incoming calls
when the device is paired with a phone.
Press again to end call.
2. Remote Shutter Button
● Open your mobile phone’s camera, point it at
what you want to take a picture of, Press the
Remote Shutter Button (2) to take pictures.
You can also use it to start your video
camera. It’s ideal for selfies that you want to
take a long distance picture from. Place your
phone across the room and use the speaker
to snap a photo.
Note: Ensure Bluetooth® is connected. Can
be activated whilst music is playing.
● To access Siri or Google Now, press and hold
(2) to activate voice assistant feature. Wait for
sound and ask anything.
3. Bluetooth® Indicator Light:
● Rapid Flashing (2/s) Green LED light
indicates that the speaker is in Bluetooth®
Searching and Pairing Mode.
● Slow Flashing (1/s) LED light indicates that
the phone is successfully paired. Red LED
flashing indicates the right speaker and Green
LED indicates the left speaker.
4. Charge Indicator Light
● Constant Red LED light whilst the device is
charging.
● Constant Red and Blue light switch on when
fully charged.
5. Microphone
6. Lanyard Hole
7. Micro USB Port (Power Input)
8. Speaker
PAIRING
● Press and Hold the Push Button (1) on both
cubes until you hear the start-up chime. A
Green LED light will be flashing on the left
speaker and a Red LED light will be flashing
on the right speaker.
● Switch on your Bluetooth® smart-device/-
phone and wait until ‘PRED Smart Cube
Stereo’ shows up on your screen. When
‘PRED Smart Cube Stereo’ appears on your
device, select and pair with the speaker.
● When the pairing is complete, you will hear a
message and the Red and Green LED light
will flash slowly.
Note: Some mobile phones or other devices
may pair automatically when re-started.
CHARGING
● Fully charge the speakers prior to first use.
● Plug the Dual Micro USB cable into the USB
ports.
● The Red LED light will turn on to indicate the
device is charging.
● The Red LED will flash slowly when the
speaker is fully charged.
Power On/Off
Power ON: Press the Power Button (1) on both
cubes and hold until a beeping sound is heard
and the LED light flashes on both cubes.
To turn OFF: Press the Power Button on either
of the cubes and hold, “Powering Down” will
sound and the lights will switch off.
Note: It is strongly recommended that you turn
off the speakers whilst not in use.
Precautions
● Do not submerge the product in water.
● Keep speakers away from water and moisture
- do not get them wet.
● Keep speakers away from any heat source.
● Adjust volume to avoid damaging your
hearing.
● Store and use in normal environments.
Exposure to extreme elements such as fire,
water, or other extreme elements may damage
the units. Do not handle with wet hands.
● Keep debris or other items from blocking the
speakers or from entering any of the ports.
● Charge the battery in an isolated area and
keep away from flammable material.
● Do not attempt to open or take apart these
speakers. The speakers will be damaged
during that process.
● If the speaker quality deteriorates, or a slight
‘popping noise’ is heard, it may be due to low
battery. Please recharge the speakers.
● Only use a computer USB or the DC 5V power
matching the Micro USB Cable (included) to
charge.
● Do not attempt to open or take apart these
speakers. These units have no user
serviceable parts.
● Do not put any foreign objects in the USB port.
● Do not expose product to direct sunlight as it
may result in a risk of battery exploding,
overheating, or igniting.
● Do not disassemble, modify, short circuit or
heat the battery.
● Do not place it in fire or leave in a hot place.
● Only charge the battery with the specified
USB cable.
● In the unlikely event of leakage or explosion,
use sand or a chemical fire extinguisher to
extinguish.
● LiPo Battery must be recycled or disposed of
properly.
● The Micro USB cable is tailor-made for the
LiPo rechargeable battery used in your Smart
Cube Stereo Shutter. Do not use it to charge
any item other than the Smart Cube Stereo
Shutter.
Specifications
● Rated Power: 2W
● Frequency Response: 180HZ-16KHZ
● Distortion Factor: THD<1%
● Signal to Noise Ratio: S/N≥90DB
● Separation: ≥55DB
● Speaker: 23mm; 4Ω 2W
● Battery: Rechargeable Lithium-Polymer
hAm081/V7.3
Troubleshooting
No Sound:
● Make sure that the music player is working
and that the speakers are charged.
● Make sure Bluetooth® is paired with the
correct speakers.
Not Charging:
● Check to make sure that you are using the
correct cable and that it is fully plugged into
both the device and the USB port that you are
charging from. Also check to make sure the
source is turned on.
Note
This equipment has been tested and found to
comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
Installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try and correct the interference
by one or more of the following measures:
● Reorient or relocate the receiving antenna
● Increase the separation between the
equipment and receiver
● Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected
● Consult the dealer or experienced radio/TV
technician for help
This Device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
This device complies with Industry Canada
Licence-exempt RSS-210. Operation is subject
to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
CAUTION: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
For these purposes, the party responsible is:
Pred Technologies USA Inc.
7855 Prospect Street
Suite 310
La Jolla, CA 92037
1-858-999-2114
WARNING! This equipment may experience
difficulty and/or memory loss when subjected to
any electrostatic discharge, radio frequency
interference, or sudden power surge/interrup-
tion. The user is encouraged to reset the
equipment should any of these occur.
Manufactured and distributed by Pred
Technologies USA Inc. Product names,
designations, and logos are trademarks or
registered trademarks of Pred Technologies
USA Inc. All rights reserved.
Customer Service Website:
www.predtechnologies.com
We recommend that you retain our address for
future reference. Product and colors may vary.
Packaging designed in San Diego and printed
in China.
MADE IN CHINA.
Manufactured and distributed by
Pred Technologies USA Inc.
All Rights Reserved.
Pred Technologies USA Inc.
7855 Prospect Street
Suite 310
La Jolla, CA 92037
Customer Service:
www.predtechnologies.com
Assortment No: P3001
Smart Cube Stereo Shutter
Lanyard
2x Smart Cube Stereo Shutter
Micro USB Cable
P3001US03CBF_IML
DUAL WIRELESS STEREO
SPEAKERS
SMART CUBE
STEREO