Datasheet
Electrical specifications:
Specifications range:
-20°C to +60°C
Common specifications:
Supply voltage, universal .................. 21.6...253 VAC, 50...60 Hz
or 19.2...300 VDC
Max. consumption ............................. ≤ 2.5 W
Fuse ................................................... 400 mA SB / 250 VAC
Isolation voltage, test / operation ...... 2.3 kVAC / 250 VAC
Communications interface ................ Programming front 4501
Signal / noise ratio ............................. Min. 60 dB (0...100 kHz)
Response time (0...90%, 100...10%):
Temperature input .......................... ≤ 1 s
mA / V input ................................... ≤ 400 ms
Calibration temperature ..................... 20...28°C
Accuracy, the greater of the general and basic values:
Auxiliary supplies:
2-wire supply (terminal 44...43) ......... 25...16 VDC / 0...20 mA
Max. wire size .................................... 1 x 2.5 mm
2
stranded wire
Screw terminal torque ....................... 0.5 Nm
Relative humidity ............................... < 95% RH (non-cond.)
Dimen., without display front (HxBxD) . 109 x 23.5 x 104 mm
Dimensions, w. display front (HxBxD) . 109 x 23.5 x 116 mm
Protection degree .............................. IP20
Weight ............................................... 170 g / 185 g with 4501
RTD, linear resistance and potentiometer input:
Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, PT250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000
Cable resistance per wire (max.), RTD 50 Ω
Sensor current, RTD .......................... Nom. 0.2 mA
Effect of sensor cable resistance
(3- / 4-wire), RTD ............................... < 0.002 Ω / Ω
Sensor error detection, RTD .............. Yes
Short circuit detection, RTD .............. < 15 Ω
TC input:
Thermocouple type ........................... B, E, J, K, L, N, R, S,
T, U, W3, W5, LR
Cold junction compensation (CJC):
via external sensor
in connector 5910 ........................... 20...28°C ≤ ±1°C
-20...20°C/
28...70°C ≤±2°C
via internal CJC sensor ................... ±(2.0°C + 0.4°C * Δt)
Δt = internal temperature - ambient temperature
Sensor error detection, all TC types .. Yes
Sensor error current:
when detecting ............................... Nom. 2 μA
else.................................................. 0 μA
Current input:
Measurement range .......................... 0...20 mA
Programmable measurement ranges . 0...20 and 4...20 mA
Input resistance ................................. Nom. 20 Ω + PTC 50 Ω
Voltage input:
Measurement range .......................... 0...12 VDC
Programmable measurement ranges . 0/0.2...1; 0/1...5; 0/2...10 V
Input resistance ................................. Nom. 10 MΩ
Current output:
Signal range (span) ............................ 0...20 mA
Programmable signal ranges ............. 0/4...20 and 20...4/0 mA
Load (max.) ........................................ 20 mA / 800 Ω / 16 VDC
Load stability ..................................... ≤ 0.01% of span / 100 Ω
Sensor error detection ....................... 0 / 3.5 / 23 mA / none
NAMUR NE43 Upscale / Downscale .. 23 mA / 3.5 mA
Current limit ....................................... ≤ 28 mA
Voltage output:
Signal range ...................................... 0...10 VDC
Programmable signal ranges .............
0/0.2...1; 0/1...5 ; 0/2...10;
1...0.2/0; 5...1/0; 10...2/0 V
Load (min.) ......................................... 500 kΩ
Relay outputs:
Relay functions .................................. Setpoint, Window, Sensor
error, Latch Power and Off
Hysteresis, in % / display counts ...... 0.1...25% / 1...2999
On and Off delay ............................... 0...3600 s
Max. voltage ...................................... 250 VRMS
Max. current ...................................... 2 A / AC or 1 A / DC
Max. AC power .................................. 500 VA
Sensor error detection ....................... Break / Make / Hold
Ex / I.S. approval:
FM, applicable in ............................... Cl. I, Div. 2, Gr. A, B, C, D
Class I, Div. 2, Group IIC
Zone 2
Max. ambient temperature for T5 ...... 60°C
Marine approval:
Det Norske Veritas, Ships & Offshore . Stand. f. Certific. No. 2.4
GOST R approval:
VNIIM, Cert. No. ................................ www.prelectronics.com
Observed authority requirements: Standard:
EMC 2004/108/EC ............................ EN 61326-1
LVD 2006/95/EC ................................ EN 61010-1
FM ..................................................... 3600, 3611, 3810 and
ISA 82.02.01
UL, Standard for Safety ..................... UL 508
of span = of the currently selected measurement range
Order codes:
4116 = Universal transmitter
4501 = Display / programming front
5910 = CJC connector
PR 4501 Display / programming front
Technical characteristics:
• LCD display with 4 lines; Line 1 (H=5.57 mm) shows input
signal, line 2 (H=3.33 mm) shows units, line 3 (H=3.33
mm) shows analogue output or TAG no. and line 4 shows
communication and relay status.
• Programming access can be blocked by assigning a
password. The password is saved in the transmitter in order
to ensure a high degree of protection against unauthorised
modifications to the configuration.
Mounting / installation:
• Click 4501 onto the front of 4116.
Application:
• Communications interface for modification
of operational parameters in 4116.
• Can be moved from one 4116 module to
another and download the configuration
of the first trans mitter to subsequent
transmitters.
• Fixed display for visualisation of process
data and status.
Input
type
Min.
value
Max.
value
Standard
Pt100
Ni100
Lin. R
Potentiometer
-200°C
-60°C
0 Ω
10 Ω
+850°C
+250°C
10000 Ω
100 kΩ
IEC60751
DIN 43760
-
-
4116Y103-UK (1013)
General values
Input
type
Absolute
accuracy
Temperature
coefficient
All ≤ ±0.1% of span ≤ ±0.01% of span / °C
EMC immunity influence ........................... < ±0.5% of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst .............. < ±1% of span
Basic values
Input
type
Basic
accuracy
Temperature
coefficient
mA ≤ ±4 μA ≤ ±0.4 μA / °C
Volt ≤ ±20 μV ≤ ±2 μV / °C
Pt100 ≤ ±0.2°C ≤ ±0.01°C / °C
Linear resistance ≤ ±0.1 Ω ≤ ±0.01 Ω / °C
Potentiometer ≤ ±0.1 Ω ≤ ±0.01 Ω / °C
TC type:
E, J, K, L, N, T, U
≤ ±1°C
≤ ±0.05°C / °C
TC type: R, S, W3,
W5, LR
≤ ±2°C
≤ ±0.2°C / °C
TC type: B
160...400°C
≤ ±4.5°C
≤ ±0.45°C / °C
TC type: B
400...1820°C
≤ ±2°C
≤ ±0.2°C / °C