EH0208 (JDO240V) Heavy Duty Halogen Heater 2 Heat settings Adjustable thermostat Free-standing or wall mounting Convenient carrying handle Safety overload cut-out Page 1
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the product including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. INSTALLATION Attach one braked castor and one unbraked castor to each foot, using the M6 nut and washer provided.
• Place the EH0208 on a firm flat stable surface, and apply the brakes to both braked castors. • Ensure that curtains are at least 900mm (3') from the top of the heater. • Do not cover. This symbol shown on the casing of the heater means that the heater should not be covered. • For indoor use only • Not suitable for use in boats, caravans or similar locations. • Do not locate the heater immediately below a mains socket outlet.
OPERATION Plug the mains lead into a 13 Amp mains socket. If connecting via an extension lead, make sure that the lead is rated at 13 Amps, and that it is fully unwound. Place the EH0208 on a firm flat stable surface, and apply the brakes to both braked castors. Switch the unit on at the mains socket.
MAINTENANCE Before cleaning, turn the heater off, and disconnect from the mains supply. The heater may then be cleaned using a damp cloth with a drop of washing-up liquid to remove any dust or dirt from the case. Do no use stronger detergents or solvents as these may damage the paint finish. Using a dry 1" (25mm) paint-brush, remove any dust from the grilles. If the mains lead is damaged, it must be replaced by the manufacturer or an authorised service centre.
DISPOSAL AND RECYCLING You must not dispose of this appliance with domestic household waste. Most local authorities have specific collection system for appliances and disposal is free of charge to the end-user. When replacing an existing appliance with a similar new appliance your retailer may take the old appliance for disposal. TECHNICAL SPECIFICATION Dimensions: Weight: Power supply: Power consumption: Operating current: 880x490x550mm 15.
SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of twelve months. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit , then the warranty will be rendered void. The product you buy may sometimes differ slightly from illustrations. This warranty is in addition to, and does not affect, your statutory rights.
