User Manual

SERVICING THE POWER SYSTEM
23
Required Tools and Fasteners:
#1 Phillips Screwdriver
M3 Hex Driver
1.
2.
3.
4.
5.
Following the installation instructions in reverse, remove the spinner, propeller and collet adapter from the motor.
Use a #1 Phillips screwdriver to remove the cowling screws from the plastic tabs on the side of the fuselage.
Pull the plastic tabs away from the fuselage, and remove the cowling from the fuselage.
Remove the (4) bolts holding the motor to the firewall using a #1 Phillips screwdriver. Disconnect the motor from the ESC.
To remove the ESC, disconnect the ESC from the receiver or the Aura 8, and remove any cable ties holding the ESC to the fuselage.