INSTALLATION INSTRUCTIONS PRC LCD Ceiling Mount NORTH AMERICA EUROPE AUSTRALIA, NEWZEALAND, OCEANIA (DISTRIBUTOR) 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 P.O. Box 295 Mordialloc Victoria 3195 Australia Phone: 03 9586 63 30 www.premiermounts.com.
PRC Table of Contents Parts List ............................................................................................................................................................- 3 Installation Tools ...............................................................................................................................................- 3 AST-2446 Installation ..................................................................................................................................
PRC Parts List This ceiling mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Please review all WARNING and CAUTION statements (see Page 8) before beginning the installation of the PRC. AST-2446 (Qty 1) PRC-LA (Qty 1) The AST-2446 is not included with the PRC-LA.
PRC Features: The PRC-LA allows tilt and pivot adjustments ±15° from center, 360° side-to-side swivel, and cable access. The AST-2446 allows height adjustment from 24 to 46 inches. Plus it also features two cable access openings.
PRC AST-2446 Installation If the AST-2446 will not be used to mount the PRC, then a suitable piece of threaded pipe can be used. These instructions will tell the user how to mount an AST-2446 to the ceiling. If a custom piece of threaded pipe is used, it is the responsibility of the user to determine how best to mount the PRC and pipe. Single Stud Installation – Wood screws (Commercially Available) Solid Surface Installation – Concrete wedge anchors (Commercially Available) 1.
PRC PRC Installation 1. Screw the PRC-LA coupling adapter to the AST-2446 adapter or 1½" (NPT) Pipe. 2. Secure the coupling with the M6 set screw (supplied). Adjustable Suspension Adapter Coupling Keyhole Opening Mounting Plate Display Installation 1. 2. Place the display on a soft flat surface, face down. Insert the two upper screws (thread on 3 turns). Do not insert the lower screws at this time. Mounting Hardware Display 3.
PRC UFP-220 Adapter Plate (Optional Installation) Tension Adjustment 1. 1. 2. Attach the UFP-220 Adapter Plate to the back of the display using the six (6) M4 x 10mm flat head screws. Attach the PRC mounting plate to the back of the UFP-220 using the four (4) M4 x 5 mm screws. 2. 3. Swivel Adjustment – Use a ¾” wrench to tighten and loosen the swivel adjustment. Tilt Adjustment - Use a 14mm socket to tighten and loosen the tilt adjustment.
PRC Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original installation of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.