INSTALLATION INSTRUCTIONS AM250/AM250-FLIP Universal Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 Other Locations - Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2008 9531-008-001-05 AUSTRALIA, NEW ZEALAND, OCEANIA (Distributor) P.O.
AM 250 Table of Contents Warning Statements Parts List Installation Tools Thread Depth Indicator Mount Installation Concrete Mounting Universal Mounting Bracket Assembly Attaching the Display Securing and Leveling the Display Tilt Positioning Technical Specifications Warranty 2 3 3 6 7 8 8 9 10 10 11 12 Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD.
AM250 Parts List This mount is shipped with all installation hardware and components. Make sure that none of these parts are missing and/ or damaged before beginning installation. If there are parts missing and/or damaged, please stop and contact Premier Mounts (800) 368-9700.
AM250 Parts List (Cont.
AM250 Parts List (Cont.) Nylon spacers and flat washers' actual size. The nylon spacers may be stacked to achieve proper spacing.
AM250 Thread Depth Indicator Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). Step 2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied). Step 3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw. Step 4. The screw length must not bypass the marking.
AM250 Mount Installation THE FOLLOWING STEPS SHOULD BE PERFORMED BY TWO PEOPLE. For ease of installation, it is recommended that two people perform the installation. One person should hold the mount while the other person installs the lag bolt and washer. Making sure that the mount is level, the person not holding the mount must mark and drill the second mounting hole and secure the second lag bolt and washer.
AM250 Concrete Mounting Concrete anchors must be used for concrete installation. They can be purchased at your local hardware store. The mounting surface must be a minimum 6” thick. Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. Step 7. Step 8. Begin by placing the mount into position against the wall, keeping it level. Mark off four holes to be used for securing the mount. Next, drill holes using a masonry bit for your anchors (recommended 5/16” masonry bit).
AM250 Attaching the Display IT IS RECOMMENDED THAT TWO PEOPLE MOUNT THE DISPLAY, AS THE UNIT IS HEAVY AND, IF DROPPED, WILL DAMAGE THE MOUNT, THE DISPLAY, AND/OR PERSONNEL. Upper Mounting Bar Step 1. Place the universal brackets and the display over the upper mounting bars of the AM250. Lower Mounting Bar Upper Mounting Bar Step 2. Lower the universal mounting brackets and display onto the mounting bars of the AM250. Lower Mounting Bar Step 3.
AM250 Securing and Leveling the Display Once the brackets have been placed over the upper mounting bars on the AM250, use two (2) M6 x 30mm Phillips Head locking screws to secure the brackets to the bottom of the mounting bars. This will prevent lateral shift movement. Level your flat panel by installing the two additional M6 x 30mm Phillips Head screws to the upper bracket assembly as shown below. Once the display is level, tighten the locking screws.
AM250 Technical Specifications All measurements are in inches (mm). 28.00 (711.20) 28.79 (731.79) 3.00 (76.20) 20.40 (510.54) 12.53 (317.5) 27.00 (685.80) 29.64 (752.86) 16.00 (406.40) 1.50 (38.04) 3.55 (90.17) 14.03 (356.
AM250 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original installation of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.