CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Tilting Wall Mount for 37˝ to 63˝ Flat Panels Model: CTM-MS2 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888 Other Locations Phone: (001) 714-632-7100 Fax: (001) 714-632-1044 EUROPE Unit 3, The Moorings Business Park, Channel Way, Longford, Coventry, CV6 6RH, UK Phone: +44 (0) 24 7664 4105 Fax: +44 (0) 24 7664 4165 9531-000-311-08
CTM-MS2 Contents Weight Limit............................................................................................................................................................... 2 Warning Statements.................................................................................................................................................. 2 Installation Tools.......................................................................................................................................
CTM-MS2 Installation Tools The following tools may be required, dependent upon your particular installation. These tools are not provided by Premier Mounts, but you can purchase them at your local hardware store. Electronic Stud Finder Protective Eyewear Pencil ½˝ Socket Socket Wrench ¼ ˝ Drill Bit Portable Drill Phillips Head Screwdriver Parts List Your Premier Mounts product is shipped with all proper installation hardware and components.
CTM-MS2 Parts List (cont’d) Mounting Hardware M4 x 16mm Screw (Qty 6) M4 x 25mm Screw (Qty 6) M4 x 30mm Screw (Qty 6) M5 x 16mm Screw (Qty 6) M6 x 30mm Screw (Qty 6) M6 x 45mm Screw (Qty 6) M8 x 16mm Screw (Qty 6) M8 x 25mm Screw (Qty 6) M5 x 25mm Screw (Qty 6) M8 x 30mm Screw (Qty 6) M5 x 30mm Screw (Qty 6) M6 x 16mm Screw (Qty 6) M6 x 25mm Screw (Qty 6) Page 4 M8 x 45mm Screw (Qty 6) M8 x 70mm Screw (Qty 4) Visit the Premier Mounts website at http://www.premiermounts.
CTM-MS2 Features Mounting Slots Allow for a variety of stud configurations and lateral adjustments when installing the wall plate. Cable/Electrical Cut Out Allows for easy cable access and power distribution installations. Directional Mounting Arrow Lets you know which edge is the top. Safety Knurl Knobs Prevent the flat panel from being removed or dislodged from the wall plate. Universal Spacers Premier Mount’s uniquely designed spacers that fit multiple screw sizes.
CTM-MS2 Installing the Wall Plate Introduction Directional Mounting Arrow The Directional Mounting Arrow stamped into the CTM-MS2 wall plate indicates which edge is the top. Visual Centering Diamond The Visual Centering Diamond will guide you in determing the screen placement on the wall. Mounting Safety Two people are recommended to install the wall plate.
CTM-MS2 Installing the Wall Plate (cont’d) Step 4 ➊➊ Place the wall plate against the wall and align it with ➋➋ ➌➌ the pilot hole. Insert one (1) 5/16˝ x 3˝ lag bolt and one (1) 5/16˝ washer into the upper right pilot hole. Use a socket wrench and a ½˝ socket to tighten the lag bolt. Do not overtighten the lag bolt. Step 5 ➊➊ Level the wall plate. ➋➋ Use a pencil to mark the remaining three (3) mounting locations along the center of each wall stud.
CTM-MS2 Installing the Mounting Brackets Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat panel. ➋➋ Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. ➌➌ Mark the straw or toothpick 1/8” above the depth of the threaded insert, as shown in Figure 1.
CTM-MS2 Installing the Mounting Brackets (cont’d) Griplate™ Installation Premier Mounts’ Universal Washers are designed to accommodate the various M4, M5, M6 and M8 hole sizes required by flat panels. M8 M5, M6 M4 Do not place excessive pressure on the back of the flat panel, as this may damage the flat panel. The Universal Washer must be installed between the head of the mounting screw and the mounting bracket as shown with dimples facing down.
Installing the Mounting Brackets (cont’d) CTM-MS2 Attaching the Mounting Brackets to the Flat Panel This section presumes that you have read and understood these sections: ●● Selecting the Proper Mounting Hardware ●● Universal Washer Installation ●● Universal Spacer Installation ➊➊ Place your flat panel screen-side down on a soft, flat surface. ➋➋ Identify the number and location of the thread inserts on the back of your flat panel.
CTM-MS2 Safety Knurl Knob Installation If you chose not to install the safety knurl knobs and instead chose to use the Panelock™, skip this section and proceed to the Panelock™ Installation section below. The Panelock™ is a theft deterent device. It comes with security hardware that requires a special tool that is used to install and remove the security head screws. The safety knurl knobs keep the flat panel from being accidently dislodged from the CTM-MS2.
Locking Safety Screw Installation CTM-MS2 The locking safety screws keep the flat panel from being accidently dislodged from the CTM-MS2. ➊➊ Thread an M6 x 30mm locking safety screw at the ➋➋ ➌➌ bottom of one of the mounting brackets. Use a Phillips head screwdriver to tighten the locking safety screw. Repeat steps 1 and 2 for the other locking safety screw. M6 x 30mm Locking Safety Screw (1 per Bracket) Do not overtighten the locking safety screws.
CTM-MS2 Technical Specifications All measurements are in inches [millimeters]. Installation Instructions Visit the Premier Mounts website at http://www.premiermounts.
CTM-MS2 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
