Installation instructions

Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 1
CPC Pipe Cable Cover Kit Installation Instructions
9533-040-001-00
Parts List
CPC
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: [phone]
Fax: [phone]
Other Locations – Phone: [phone]; Fax: [phone] ©Premier Mounts 2010
Clasp additional CPCs as
needed.
Clasp multiple CPCs over
the pipe or tubing to cover
the length of the cabling
and/or wiring.
Step 3
Clasp the CPC over the cabling or wiring, and pipe or tubing (Figure 1).
Step 2
Make sure the pipe or tubing is outside the inner ribs of the CPC (Figure 2).
The CPC Pipe Cable Covers t over pipes and tubing. Conceal cables and
electrical conduits by running them alongside the pipe or tubing. The CPCs t
1½” pipes, 2” pipes, 2” tubing, 1”x1” square tubing, and Premier Mounts’ elliptical
tubing.
After you have completed installing
the A/V components, choose the
appropriate CPC length for the pipe
or tubing.
You may use multiple CPCs
together to conceal all cable
and electrical wiring.
Step 1
Clasp the CPC over the wide side of the elliptical tubing (Figure 2).
12” CPC (Qty 4)
2” CPC (Qty 2)
Elliptical Tubing
or
Rib
Pipe or Tubing
Figure 2
Figure 1