Installation instructions

Installation Instructions Visit the Premier Mounts website at http://www.mounts.com Page 1
Mac mini™ Mounting Bracket Installation Instructions
9533-044-011-00
Parts List
CTM-MAC2
Mac mini™ Mounting Bracket
(Qty 1)
M5 Allen Wrench
(Qty 1)
PaneLock™ Security Hook
(Qty 2)
M6 x 12mm Lock-It™ Security Screw
(Qty 2)
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: [phone]
Fax: [phone]
Other Locations – Phone: [phone]; Fax: [phone] ©Premier Mounts 2010
Slide a PaneLock™ security
hook on the top mounting bar,
placing it on the outside edge
of the Mac mini™ Mounting
Bracket.
Make sure the PaneLock™
security hook is facing the
same direction as shown.
Step 4
Hook the Mac mini™ Mounting Bracket on the top mounting bar of the
mount
(Mac mini™ not shown).
Step 3
Step 5
The mount must be installed before attaching the Mac mini™ Mounting
Bracket.
Insert and tighten one (1)
M6 x 12mm Lock-It™ security
screw to attach the PaneLock™
security hook to the Mac mini™
Mounting Bracket.
Step 6
Repeat steps 4 and 5 to attach the remaining PaneLock™ security
hook on the other side of the Mac mini™ Mounting Bracket.
When nished, the mounting bar of the mount will effectively lock
the Mac mini™ in place and prevent theft.
The Mac mini™Mounting Bracket is the perfect accessory for securely
holding a Mac mini™ behind any of Premier Mounts’ CTM, PCM and
PRO Tilt Series mounts (sold separately).
Place the Mac mini™ facedown in
the slot of the Mac mini™ Mounting
Bracket.
Step 1
Front View
The Mac mini™’s DVD drive
should be accessible from
the bottom of the mounting
bracket.
• All trademarks are the property of the respective trademark owners.
If using the mounting bracket with a PRO tilt mount, the bottom tabs of
the mounting bracket should lock behind the bottom hooks of the back
plate.