INSTALLATION INSTRUCTIONS FLIP Flip-Down LCD Mount NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2009 9531-017-011-00 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710
FLIP Mount Table of Contents Warning Statements Parts List Installation Tools FLIP Mount Location Hardwood Cabinet Installation Softwood Cabinet Installation Mount Installation - Wall Surface (Optional) Attaching the Flat Panel FLIP Mount Adjustments Final Adjustments Technical Specifications Warranty 2 3 3 4 5 6 7 8 9 9 10 11 Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD.
FLIP Mount Parts List Congratulations on the purchase of your new Premier Mounts FLIP flat panel mount. This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800) 368-9700. The M5 flat head screw will prevent the FLIP mount mounting plate from rotating 360°.
FLIP Mount FLIP Mount Location Before drilling, make sure that there is enough room to lower and raise the display. For example, when the display is put in the “up” position, it should not hit the wall and should be even with the front of the cabinet. Mount placement will be primarily determined by the size of the flat panel being used.
FLIP Mount Hardwood Cabinet Installations Wood screws are recommended when mounting the FLIP mount onto hardwood surfaces. Cupboard FLIP Mount This distance was determined in the FLIP Mount Location section. Step 1. Place the FLIP Mount base on the mounting location and mark (using a pencil) where the FLIP will be mounted. The FLIP mount base may be used as a template when marking the mount location.
FLIP Mount Step 3. Line the FLIP Mount up with the two pre-drilled mounting holes and use two (2) #14 x 7/8” wood screws and secure the FLIP Mount to the underside of the cabinet using a screwdriver. Do NOT over-tighten the wood screws, as this could cause the threads to strip out the wood inside the cabinet enclosure. #14 x 7/8” Wood Screw FLIP Mount Screwdriver Softwood Cabinet Installation 1/4-20 Tee Nut and screws are recommended when installing the FLIP mount into softwood surfaces.
FLIP Mount Mount Installation - Wall Surface (Optional) Wall Stud Wall Stud Mark FLIP Mount Electronic Stud Finder Step 1. If the location where the flat panel will be installed is acceptable, use a stud finder to determine the exact center of each stud. Step 2, Once a wood stud has been located, mark this spot with a pencil. This will be the upper mounting point. Step 3. Mark the lower mounting point as well, once the upper mounting point has been marked.
FLIP Mount Attaching the Flat Panel If you chose not to use the 360° feature of the FLIP mount, please insert and tighten one (1) M5 x 10mm flat head screw into any one of the four mounting point locations (please see below for mounting points). The M5 x 10mm flat head screw will prevent the FLIP mount from rotating 360°.
FLIP Mount FLIP Mount Adjustments Vertical Adjustment 360° Rotation Adjustment Left-to-Right 360° Rotation Adjustment Final Adjustments The FLIP mount has pivots points that allow the mount to be easily adjusted. Once the adjustments have been made, the pivot points will need to be tightened. Please refer to the steps below to tighten the pivot point screws. Step 1. Make sure the FLIP mount has been adjusted to the determined viewing angle. Step 2. Locate each pivot point. Step 3.
FLIP Mount Technical Specification All measurements are in inches [mm].
FLIP Mount Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
