Specifications

Installation Instructions Page 3
Parts List
M5 x 10mm Flat Head Screw (Qty 1)
Flip Mount (Qty 1)
M4 x 10mm Combo Screw (Qty 4)
1/4-20 x 5/8” Combo Screw (Qty 2)
1/4-20 Tee Nut (Qty 2)
#14 x 2” Wood Screw (Qty 2)
Wall Stud Applications
#14 x 7/8” Wood Screw (Qty 2)
Under-counter Applications
FLIP Mount
Congratulations on the purchase of your new Premier Mounts FLIP fl at panel mount. This mount is shipped with all
proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before
beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts
[phone].
Installation Tools (not supplied)
Screwdriver
1/8” Drill Bit
(Wood Stud Installation)
Electronic Stud Finder Drill
Tape
Measure
Hammer
5/32” Allen Wrench
Pencil
5/16” Drill Bit
(Tee Nut Installation)
The M5 fl at head screw will prevent
the FLIP mount mounting plate from
rotating 360°.