Specifications

Installation Instructions Page 5
Hardwood Cabinet Installations
Step 1. Place the FLIP Mount base on the mounting
location and mark (using a pencil) where the FLIP
will be mounted.
FLIP Mount
This distance was
determined in the
FLIP Mount Location
section.
Cupboard
FLIP
Mount
Prior to drilling into the underside of the
cabinet, it is strongly recommended that
all items be removed from the cabinet.
Step 2. Using a 1/8” drill bit and portable
drill, pre-drill both pilot holes at the
marked locations.
Marking
1/8” Drill
Bit
Drill
Wood screws are recommended when mounting the FLIP mount onto hardwood surfaces.
The FLIP mount base may be used as a
template when marking the mount location.