Specifications

Installation Instructions Page 9
FLIP Mount
FLIP Mount Adjustments
Vertical Adjustment Left-to-Right 360° Rotation
Adjustment
360° Rotation Adjustment
Final Adjustments
The FLIP mount has pivots points that
allow the mount to be easily adjusted. Once
the adjustments have been made, the pivot
points will need to be tightened. Please refer
to the steps below to tighten the pivot point
screws.
Step 1. Make sure the FLIP mount has
been adjusted to the determined
viewing angle.
Step 2. Locate each pivot point.
Step 3. Use the 5/32” Allen wrench
(supplied) to tighten each pivot
point screw.
Pivot Point
Pivot Point
Screw
5/32” Allen
Wrench
Pivot Point
Pivot Point
Screw
5/32” Allen
Wrench
Tilt Adjustment
Vertical/Lateral
Adjustment