GB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00
GB-AVSTOR5 Contents Weight Limit...................................................................................................................................................................... 2 Warning Statements......................................................................................................................................................... 2 Installation Tools......................................................................................................................
GB-AVSTOR5 Installation Tools The following tools may be required depending upon your particular installation. They are not included. Ladder 1/8˝ Drill Bit Hand Held Drill Pencil Protective Eyewear ¼˝ Concrete Drill Bit Hammer Flat Washers Phillips Tip Screwdriver Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700.
GB-AVSTOR5 Features The GB-AVSTOR5 Ceiling Equipment Storage GearBox™ with integrated pipe coupler provides a secure and discrete storage-and-mounting solution for false ceiling projector installations. Integrated power receptacles, a removable equipment mounting tray and an adjustable mounting platform for 1½” NPT pipe make the GB-AVSTOR5 an indispensible, centralized A/V installation accessory.
GB-AVSTOR5 GB-AVSTOR5 Installation Introduction Please read these installation instructions thoroughly before installing your Premier Mounts product. Please take a minute to familiarize yourself with the contents of the package and make sure you have all the parts and tools you need to safely complete the installation. In addition, some steps of this installation may require two people to prevent personal injury and/or damage to your equipment.
GB-AVSTOR5 Ceiling Box Installation ➊➊ Determine the desired location where the GB-AVSTOR5 is to be located. Ceiling Tile ➋➋ Remove the ceiling tile where the ceiling box will be mounted. Store the ceiling tile in a safe location in the event that it needs to be reused. Ceiling Attachment The ceiling box must be secured using the Quick Locks and 1/16˝ braided cables (supplied). Wood Stud Ceiling Wood Stud ➊➊ Determine the mounting location. ➋➋ Use a 1/8” drill bit to pre-drill the mounting holes.
GB-AVSTOR5 Truss Ceiling ➊➊ Loop the braided cable around the truss. ➋➋ Run the open end 1/16˝ braided cable through the Ceiling Truss loop. ➌➌ Pull the open end down until the ➍➍ /16˝ braided cable tightens around the truss. Repeat steps 1-3 for the remaining three mounting points. 1 Go to Quick Lock Operation on page 8. Installation Instructions Visit the Premier Mounts website at www.mounts.
GB-AVSTOR5 Quick Lock Operation Step 1 Cable Output Please follow the steps below in numerical order , and to correctly install the Quick Lock Cable Kit. , Cable Input Release Pin To release or relieve tension on the 1/16˝ braided cable, slide the release pin to disengage. /16˝ Braided Cable 1 Release Pin Mounting Hole /16˝ Braided Cable 1 Release Pin Mounting Hole Page 8 Visit the Premier Mounts website at www.mounts.
W Step 2 It is recommended that the following steps be performed by two people. ➊➊ Lower the ceiling box into the exposed ceiling framework. Make sure the ceiling box is seated completely in the ceiling framework before releasing it. 15° ➋➋ Adjust the 1 /16˝ braided cable so that the cable forms a 15° angle away from the corner of the ceiling box.
GB-AVSTOR5 Wiring the Electrical Box WARNING! Do not install or modify electrical wiring unless you are a certified electrician. M4 x 8mm Phillips combo screw ➊➊ Remove two (2) M4 x 8mm Phillips combo screws to ➋➋ detach the electrical box from the ceiling box (Figure 1). Have a certified electrician do the following: Punch out the appropriate power knockout(s) on the side of the ceiling box (Figure 2). Hook up all loose wiring in the electrical box. Re-install the electrical box inside the ceiling box.
GB-AVSTOR5 Mounting Tray Installation For ease of installation, the mounting tray comes packaged in a separate box within the master carton. Installers may pre-wire the mounting tray prior to the GB-AVSTOR5 ceiling box installation. Zip ties (included), small screws and flat washers are strongly recommended to hold all equipment in place. Attaching Equipment to the Tray ➊➊ Place your electronic components onto the mounting tray.
GB-AVSTOR5 Ceiling NPT Adapter Plate Adjustment ➊➊ Locate the pre-installed ceiling NPT adapter plate ➋➋ ➌➌ ➍➍ inside the GB-AVSTOR5. Loosen the wingnuts. Slide the ceiling NPT adapter plate to the desired position. Re-tighten the wingnuts. Continue to Securing the 1 ½˝ NPT Pipe to the GBAVSTOR5 below. View of the ceiling NPT adapter plate inside the GB-AVSTOR5 Securing the 1 ½˝ NPT Pipe to the GB-AVSTOR5 ➊➊ Secure the 1 ½″ NPT pipe to the mounting coupler ➋➋ and tighten the pipe.
Securing the Lid Step 1 ➊➊ Re-attach the ceiling box lid to the ceiling box. ➋➋ Swing the ceiling box lid up into place. Step 2 ➊➊ Hold the lid in place. ➋➋ Use a key (supplied) to lock the lid in place. ➌➌ Do not release the ceiling box lid until you are sure that the lock has been engaged and the lid is secure. Installation Instructions Visit the Premier Mounts website at www.mounts.
Technical Specifications All measurements are in inches [mm]. 606.43 23.875 479.01 18.859 128.21 5.048 21.348 127 5.000 568.71 22.390 546.10 21.500 546.10 21.500 128.21 5.05 152.40 6.000 606.43 23.875 Page 14 Visit the Premier Mounts website at www.mounts.
Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
