CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS GB-VESA42 VESA Tilting GearBox Mount NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888 Other Locations Phone: (001)-714-632-7100 Fax: (001)-714-632-1044 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 9533-009-011-00
GB-VESA42 Contents Weight Limit............................................................................................................................................................... 2 Warning Statements.................................................................................................................................................. 2 Installation Tools.....................................................................................................................................
GB-VESA42 Installation Tools The following tools may be required, dependent upon your particular installation. These tools are not provided by Premier Mounts, but you can purchase them at your local hardware store. Electronic Stud Finder Hand Held Drill Protective Eyewear Hammer** ** Optional tools for concrete installations.
GB-VESA42 Parts List (cont’d) Mounting Hardware M4 x 10mm Phillips Head Screw (Qty 6) M6 x 10mm Phillips Head Screw (Qty 4) M5 x 10mm Phillips Head Screw (Qty 4) M6 x 16mm Phillips Head Screw (Qty 4) M5 x 16mm Screw (Qty 4) M6 x 20mm Phillips Head Screw (Qty 4) M5 x 20mm Phillips Head Screw (Qty 4) M5 x 30mm Phillips Head Screw (Qty 4) M6 x 30mm Phillips Head Screw (Qty 4) M6 x 45mm Phillips Head Screw (Qty 4) M5 x 45mm Phillips Head Screw (Qty 4) Page 4 Visit the Premier Mounts website at htt
GB-VESA42 Features Stylish Design Sleek and unobtrusive, yet supremely sturdy. Integrated GearBox™ Storage Gearbox™ discretely holds media equipment and cabling behind the display Adjustable Tilt Provides up to 8º of downward tilt Versatile Mounting Points The GB-VESA42, provides mounting points for VESA 100 x 100mm, 200 x 100mm, 200 x 200mm, 400 x 200mm mounting configurations.
GB-VESA42 Installing the Wall Plate Determining the Mounting Surface If you will be installing your GB-VESA42 mount to wood studs, proceed to the “Wood Stud Installation” section. If you will be installing your GB-VESA42 mount to a concrete wall, proceed to the “Concrete Installation” section. Wo od Stu d Co n cre te Separating the Mounting Plates 1) Loosen the (4) M6x12 screws from all the points labled (A) on the figure. 2) Lift up to separate the front mounting plate from the back wall plate.
GB-VESA42 Installing the Wall Plate (cont’d) Step 3 Drill a “pilot hole” in the center of the upper right mark using a ¼″ drill bit and power drill. Only use a ¼″ drill bit when drilling the pilot holes. Step 4 1) Place the wall plate against the wall and align it with the pilot hole. 2) Insert one (1) 5/16″ x 3″ lag bolt and one (1) 5/16″ washer into the upper right mounting hole and tighten using a socket wrench and ½″ socket. Do not overtighten the lag bolt. Step 5 1) Level the wall plate.
GB-VESA42 Installing the Wall Plate (cont’d) Step 7 1) Insert one (1) 5/16″ x 3″ lag bolt and one (1) 5/16″ washer into each pilot hole. 2) Tighten all lag bolts using a socket wrench and ½″ socket. Do not overtighten the lag bolts when attaching the mount to the wall. Improper installation may result in personal injury or property damage. Proceed to the “Installing the Front Bracket” section. Concrete Installation The supplied 5/16″ concrete wedge anchors must be used for concrete installation.
GB-VESA42 Installing the Wall Plate (cont’d) Step 3 1) Insert a concrete wedge anchor into each hole. If necessary, lightly tap each concrete wedge anchor into place with a hammer. 2) Remove the nuts and washers from all four (4) concrete wedge anchors. 3) Replace the washers which you removed from the concrete wedge anchors with the 5/16″ washers shown in the parts list on Page 3.
GB-VESA42 Mounting Hardware (cont’d) Universal Spacer Installation Premier Mounts’ Universal Spacers allow you to attach the mounting bracket to flat panels which have recessed or uneven mount points. Each Universal Spacer adds ¼˝ to the distance between the mounting bracket and your flat panel. The Universal Spacers must be stacked and oriented as shown. The Universal Spacers must only be installed between the mounting bracket and your flat panel.
GB-VESA42 Securing the GB-VESA42 Mount Secure the mount in place by tightening the (4) M6x12 screws (A) removed at the start of installation. Do not overtighten the screws. (A) (A) (A) (A) Technical Specifications All measurements are in inches [millimeters]. 19.250 400 15.748 200 7.874 100 3.937 8° 200 7.874 d 100 3.937 229.64 9.041 406.40 16.000 53.38 2.102 d SECTION d-d 292.10 11.500 177.80 7.000 165.10 6.500 200.03 7.875 234.95 9.250 58.69 2.311 425.45 16.
GB-VESA42 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.