Installation Instructions INW-AM325 In-Wall Mount NORTH AMERICA 3130 E. Miraloma Ave. Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 www.mounts.com 9534-000-011-00 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 AUSTRALIA, NEW ZEALAND, OCEANIA (DISTRIBUTOR) P.O. Box 295 Mordialloc Victoria 3195 Australia Phone: 03 9586 6330 www.premiermounts.com.
INW-AM325 TABLE OF CONTENTS Warning Statements Parts List Installation Tools Mount Location Wall Cut-Out Attaching the INW-AM325 Side Cover Installation In-Wall Electrical Box Installation AM3/AM3-B and AM250 Installation Final Installation Technical Specifications Warranty Contact Premier Mounts Notes 3 4 4 5 5 6 6 6 7 7 8 8 8 8 ELECTRICAL SHOCK HAZARD!! Cutting or drilling into electrical wires and cables can cause DEATH or SERIOUS PERSONAL INJURY! Always make certain the area behind the mounting surfa
INW-AM325 Warning Statements THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST A MINIMUM WEIGHT OF 250 LBS. IF NOT, THE WALL MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT.
INW-AM325 Parts List This mounting box is shipped with all installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop and contact Premier Mounts - (800) 368-9700. It is strongly recommended that a licensed electrician supply wire and power to the INW-AM325. Pre-wiring must be complete prior to installing the INW-AM325.
INW-AM325 Mount Location Always make certain the area behind the mounting surface is free of electrical wires, cables, and pipes before cutting, drilling, or installing the mounting screws. It is strongly recommended that a licensed electrician supply wire and power to the in-wall mounting box. Prior to intsalling the INW-AM325, please complete all wiring and allow for the appropriate amount of slack. Wall Cut-Out 1. Determine where the location of the mount/display will be.
INW-AM325 Side Cover Installation INW-AM325 Installation Complete When attaching the side covers, make sure that the 1/4” wood shims are in line with the side cover mounting holes. If the wood shims split while attaching the wood screw, don't panic. These wood shims have been designed to split in half to cover more area. 1. To attach the side covers, use four (4) #14 x 1-1/4” wood screws to attach the side covers. 2.
INW-AM325 AM3/AM3-B and AM250 Installation See the AM3/AM3-B and AM250 Installation Instructions for further instructions. AM3/AM3-B AM250 1. Use eight (8) 5/16” X 1/2” hex head bolts and eight (8) lock 1. Use four (4) 5/16” X 1/2” hex head bolts and four (4) lock washers to attach the AM250 to the INW-AM325. washers to attach the AM3 / AM3-B to the INW-AM325. 2. Tighten using a socket wrench. 2. Tighten using a socket wrench.
INW-AM325 Technical Specifications All measurements in inches/(mm). Warranty Limited Lifetime Warranty All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials and workmanship. Premier Mounts is not liable for improper installation that results in damage to mounts, adapters, display equipment or personal injury. Any modification to the existing mount will void the manufacturers' warranty. DISCLAIMER OF WARRANTY.