LMVP Portrait Mode Video Wall Flat-Panel Framing System INSTALLATION INSTRUCTIONS 9541-000-011-0X Rev.
LMVP Contents Weight Limit............................................................................................................................................................... 2 Warning Statements.................................................................................................................................................. 2 Installation Tools..........................................................................................................................................
LMVP Installation Tools The following tools may be required depending on your installation.
LMVP Parts List (cont’d) Mounting Hardware Page 4 M4 x 12mm Screw (Qty 6) M6 x 12mm Screw (Qty 6) M4 x 16mm Screw (Qty 6) M6 x 16mm Screw (Qty 6) M4 x 25mm Screw (Qty 6) M6 x 25mm Screw (Qty 6) M5 x 12mm Screw (Qty 6) M8 x 12mm Screw (Qty 6) M5 x 16mm Screw (Qty 6) M8 x 16mm Screw (Qty 6) M5 x 25mm Screw (Qty 6) M8 x 25mm Screw (Qty 6) Visit the Premier Mounts website at http://www.mounts.
LMVP Features The LMVP Portrait Mode Video Wall Flat-Panel Framing System is a customizable video wall mounting system featuring multi-monitor stacking, open design, custom spacers and scissor mount extension. It has an extending scissor mount for easy installation, cable management and servicing. Spacers are custom designed for specific flat-panels.
LMVP Installation Introduction Directional Mounting Arrow The Directional Mounting Arrow stamped into the LMVP mount indicates which edge is the top. Mounting Safety Two people are recommended to install the mount. Step 1 You must secure the mount to two (2) wall studs with four (4) lag bolts (2 lag bolts for each stud found). 1) Use a stud finder to determine the exact center of wall studs in the vicinity of the mount. 2) Use a pencil to mark the exact center of each of the wall studs.
LMVP Installation Step 4 1) Place the mount against the wall and align it with the pilot hole. 2) Insert one (1) 5/16˝ x 3˝ lag bolt and one (1) 5/16˝ washer into the upper right pilot hole. 3) Use a socket wrench and a ½˝ socket to tighten the lag bolt. Do not overtighten the lag bolt. Step 5 1) Level the mount. 2) Use a pencil to mark the remaining four (4) mounting locations along the center of each wall stud.
Installing OPTIONAL Model Specific Spacers LMVP LMVP’s dedicated flat-panel spacers are engineered with the knowledge that aligning each flat-panel on a large wall is time consuming and costly. These model-specific spacers are available for most flat-panels, which significantly reduces the installation time. (Call Customer Service to inquire about model specific spacers.) Step 1 This spacer is shown for illustration purposes only.
LMVP Installing the Mounting Brackets Selecting the Mounting Hardware 1) Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. 2) Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. 3) Mark the straw or toothpick 1/8” above the depth of the threaded insert, as shown in Figure 1.
LMVP Installing the Mounting Bracket (cont’d) Universal Washer Installation Premier Mounts’ Universal Washers are designed to accommodate the various M4, M5, M6 and M8 hole sizes required by flat-panels. M8 M5, M6 M4 Do not place excessive pressure on the back of the flat-panel, as this may damage your flat-panel. The Universal Washer must be installed between the head of the mounting screw and the mounting bracket as shown.
LMVP Installing the Mounting Brackets (cont’d) Attaching the Mounting Brackets to the Flat-Panel This section presumes that you have read and understood the "Selecting the Proper Mounting Hardware" section. 1) Place your flat-panel screen-side down on a soft, flat surface. 2) Identify the number and location of the thread inserts on the back of your flat-panel. 3) Aligning the holes on each mounting bracket with the thread inserts on the back of your flat-panel.
LMVP Locking Safety Screw Installation The locking safety screws keep the flat-panel from being accidently dislodged from the LMVP. 1) Locate the pre-installed security locking safety screw at the bottom of each of the mounting brackets. 2) Use the Allen key (supplied) to tighten the locking safety screw. Pre-installed Security Locking Safety Screw (1 per Bracket) Do not overtighten the locking safety screws. Proceed to the “Post-Installation Adjustments” below.
LMVP Post-Installation Adjustments (cont'd) Tilt Left Left Control Right Control Tilt Right Left Control Right Control Tilt Up Left Control Right Control Tilt Down (from tilted-up position) Left Control Installation Instructions Right Control Visit the Premier Mounts website at http://www.mounts.
Post-Installation Adjustments (cont'd) LMVP Level Up Left Control Right Control Level Down (from leveled up position) Left Control Right Control Rotate Left Left Control Right Control Rotate Right Left Control Page 14 Right Control Visit the Premier Mounts website at http://www.mounts.
LMVP flay Maintenance and Servicing 1) Push evenly in the front of the LMVP to release the single latch spring lock(Figure 1). 2) Slowly pull the front of the LMVP to extend the scissor arms (Figure 2). 3) Loosen the locking safety screws on both mounting brackets. 4) Tilt up the bottom of the flat-panel, then set their kickstands against the bottom tubing of the mount (Figures 2 & 3). You can now reach behind the flat-panel for maintenance and servicing or replacement.
B A 8 24.70 23.62 627.4 600 7 20.89 530.6 19.70 500.4 (600x400) NOTE: WHEN REGISTERS ON THE MOUNTING ARMS ARE ALIGNED ACROSS. THE ANGLE STARTS WITH A 1 FORWARD TILT TO COMPENSATE FOR WEIGHT OF THE UNIT. 7 6 6 .33 8.5 .28 7.1 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PREMIER MOUNTS DIVISION OF< PMPI > ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF PREMIER MOUNTS DIVISION OF IS PROHIBITED. 8 MOUNTS.COM 5 5 5.12 130.1 4 4 13.41 340.
LMVP Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
