INSTALLATION INSTRUCTIONS MVW46 Videowall Frame NORTH AMERICA EUROPE 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: 1.800.368.9700 Fax: 1.800.832.4888 Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 Other Locations Phone: (001).714.632.7100 Fax: (001).714.632.
MVW46 Contents Contents........................................................................................................................................................................... 2 Warning Statements......................................................................................................................................................... 2 Installation Tools.........................................................................................................................
MVW46 Installation Tools The following tools may be required depending upon your particular installation. They are not included. Rigging Hardware Ladder #2 Phillips Tip Screwdriver M6 Allen Wrench Tape Measure Heavy-Duty Steel Tube Long Enough to Hang MVW46(s) Level Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700.
MVW46 Features The MVW46 Videowall Frame is designed for mounting the Samsung 460UT, Samsung 460UT-2, NEC X461UN, or NEC X461UN2 to Premier Mounts’ dual-pole carts and stands, or flying them from above. They can be installed in either portrait or landscape orientation. Quick-release buttons make it easier than ever to install the displays, which can be attached to the front and/or back of the MVW46. You can join multiple MVW46s horizontally and/or vertically to create a videowall.
MVW46 Installing the MVW46 Introduction The Premier Mounts MVW46 Videowall Frame is designed for use with Premier Mounts’ dual-pole carts and stands, as well as for flying from above. You may use one MVW46 as a standalone mount, or multiple MVW46s to create a videowall display. Please read through the safety instructions before installation. Are you mounting the MVW46 to a cart or stand, or flying from above? If dual-pole cart or stand, continue to Cart Or Stand Installation below.
MVW46 Step 2 Full View Side View Top/Bottom View The arrows show where the M8 x 16mm pan Phillips screws can go from inside to fasten MVW46s together. Figure 1 If you are fastening multiple MVW46s, use the M8 x 16mm pan Phillips screws provided to fasten them together from inside the frames (Figure 1). To safely install rows of multiple MVW46s, fasten them first in individual rows, then insert the tubing of the dual-pole cart or stand into each row. After that, fasten the rows together (Figure 2).
MVW46 Step 3 Slide the MVW46 to the desired height on the dual®® ¯¯ pole cart or stand. Insert four (4) M8 x 10mm set screws into the MVW46 screw holes near the tubing (see drawing). Tighten the screws against the MVW46 and tubing. Tubing of Cart or Stand Front-View Closeup of MVW46 Step 4 If you are installing a Samsung 460UT or Samsung 460UT-2, attach four (4) 8mm quickrelease buttons and four (4) M8 x 20mm pan Phillips screws to the display’s back mounting holes.
MVW46 Flying Installation Illustrations show only some of the installation configurations possible with the MVW46s. Step 1 Figure 1 If flying the MVW46(s), insert a heavy-duty steel tube (not included) into the frames’ upper 2” circular cutouts (Figure 1). Appropriate tubing and rigging hardware must be used to support a minimum of 4 times the combined weight of all the flat-panel displays and MVW46s used. The steel tube must be long enough to span the entire width of the frame(s) (Figure 2).
MVW46 Step 2 Full View Side View Top/Bottom View The arrows show where the M8 x 16mm pan Phillips screws can go from inside to fasten MVW46s together. Figure 1 If you are fastening multiple MVW46s, use the M8 x 16mm pan Phillips screws provided to fasten them together from inside the frames (Figure 1). To safely install rows of multiple MVW46s, fasten them first in individual rows, then fasten the rows together. After that, insert the heavy-duty plastic tube (Figure 2).
MVW46 Step 3 Front-View Closeup of MVW46 Heavy-Duty Steel Tube Slide the MVW46 to the desired position against the tube. ®® Insert two (2) M8 x 10mm set screws into the corner screw holes above the tube (Figure 1). ¯¯ Tighten the screws against the MVW46 and the tube. °° Inside the MVW46, wrap and secure rigging/flying M8 x 10mm Set Screw hardware (not included) around the tube (Figure 2).
MVW46 Step 6 Use the rigging/flying hardware to safely suspend ®® Rigging/Flying Hardware the MVW46(s) overhead. To set the tilt angle, attach additional cables to the bottom of the frames and pull to the desired angle (see drawing). Re-check all hardware and installation for proper tightness and security. Pull additional cables at the bottom of the frames to adjust the tilt. Technical Specifications All measurements are in inches [mm]. 40.44 400 15.75 300 11.81 23.00 300 11.81 3.36 600 23.
MVW46 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
