INSTALLATION INSTRUCTIONS PSD-S Ceiling Mount Adapter NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2008 9533-025-001-00 AUSTRALIA, NEW ZEALAND, OCEANIA (DISTRIBUTOR) P.O.
PSD-S Table of Contents Warning Statements Parts List Installation Tools Attaching the Ceiling Adapter Attaching the Mounting Plate Technical Specififcations Warranty 2 3 3 4 6 8 9 Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY. IF NOT, THE CEILING STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO.
PSD-S Parts List This ceiling mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700).
PSD-S Attaching the Ceiling Adapter Before the following steps are begun, the appropriate suspension device must be installed. Premier mounts offers the AST-1321, AST-2446 or a standard 1-1/2” NPT extension pipe. Please see the installation instructions that are included with these respective mounting configurations. Step 1. To attach the ceiling adapter to the suspension device (not included), rotate the ceiling adapter clockwise onto the suspension device a minimum of five (5) complete turns.
PSD-S A Phillips head screwdriver is required to perform the following step. Step 2. Once the ceiling adapter has been attached, tighten the M6 x 12mm Phillips head set screw using a Phillips screwdriver.
PSD-S Attaching the Mounting Plate Step 1. Use four (4) M10 hex head bolts, eight (8) M10 flat washers, and four (4) M10 nuts to attach the mounting plate to the ceiling adapter. At this time, finger tighten all hardware.
PSD-S A 17mm open-end wrench and a 17mm socket wrench will be required to perform the following step. Step 2. Once the both units have been attached together, use a 17mm socket wrench and a 17mm wrench to tighten the M10 hardware.
PSD-S Technical Specifications All measurements are in inches (mm).
PSD-S Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.