Installation manual

PSD-TS
Installation Manual Page - 3 -
Parts List
This floor stand is shipped with all proper installation hardware and components. Make sure that none of these parts
are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the
installation and contact Premier Mounts (800-368-9700).
Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of the
PSD-TS.
PSD TS Base
(Qty 1)
Support Poles
(Qty 2)
84"
72"
60"
PSD-SPA
Adapter
(Qty 1)
M8 x 10mm Set
Screw
(Qty 10)
M10 x 12mm
Slotted Hex
Head (Qty 4)
M10 Flat Washers
(Qty 4)
Shelf (Optional)
NOTE
: The
shelf is only
capable of
holding 25Lbs.
or less.
Installation Tools
Phillips Head Screw Driver Soft Material/Blanket Drill Gun
Pencil Socket Wrench 17mm Socket
5/32” Allen Key (Supplied)
The length will vary,
depending on the order.