Installation manual

UFA-XL
Page - 2 - Installation Instructions
Table of Contents
WARNING STATEMENTS ………………………………………………………………... - 2 -
PARTS LIST ………………………………………………………………………………… - 3 -
INSTALLATION TOOLS ………………………………………………………………….. - 3 -
MOUNTING HARDWARE ………………………………………………………………... - 4 -
THREAD DEPTH INDICATOR …………………………………………………………… - 5 -
SUPPORT TUBE INSTALLATION ……………………………………………………….. - 6 -
ATTACHING THE UFA-XL MOUNTING BRACKETS …………………………………. - 6 -
ADJUSTING THE UFA-XL MOUNTING BRACKETS …………………..……………... - 8 -
WARRANTY ……………………………………………………………………………….. - 8 -
TECHNICAL SPECIFICATIONS …………………………………………………………. - 9 -
Warning Statements
WARNING:
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER
MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE
CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY
DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING
FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR
MODIFICATIONS.
WARNING:
THE FLOOR STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST 320 LBS. IF NOT, THE FLOOR
STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE
TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. THE MAXIMUM WEIGHT THAT CAN
BE USED WITH THIS MOUNT IS 160 LBS. IF THIS WEIGHT IS EXCEEDED, DAMAGE TO THE MOUNT AND/OR
UNIT MAY OCCUR.
WARNING:
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
WARNING:
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE ASSEMBLY INSTRUCTIONS SHOULD BE READ AND
COMPLETELY UNDERSTOOD. THE ASSEMBLY INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL
INJURY AND PROPERTY DAMAGE. KEEP THESE ASSEMBLY INSTRUCTIONS IN AN EASILY ACCESSIBLE
LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be disconnected
from the power outlet.
Contact Premier Mounts with any questions.
Safety precautions must be taken at all times.
Warning and Caution statements.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the
plasma display and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may
result in damage to the display and could increase the risk of fire.
At least two qualified people should perform the assembly procedure. Injury and/or damage can result from dropping or mishandling
the display.
WARNING WHEN USING THE PSD-BWL NESTING CART, DO NOT ATTACH EQUIPMENT WEIGHING MORE
THAN 75LBS. ABOVE THE 60” MARKED LINE ON THE SUPPORT POLES. DOING SO MAY CAUSE
THE NESTING CART TO TIP OVER, RESULTING IN SEVERE PROPERTY DAMAGE AND/OR
PERSONAL INJURY.