Owner's Manual

Table Of Contents

Installation Instructions for Whole House Filters

General guideline for setting up a Whole House Cartridge Filter.

THANK YOU

Thank you for purchasing a new Whole House Filter from Premier Water

Systems. We appreciate the opportunity you have given us to provide you

with better water. We are committed to providing the best customer

experience possible and have provided these installation instructions to

make things as simple as possible. If you have read through these entire

instructions and FAQ section and still have questions feel free to contact

us for further help. Our office hours are Monday-Friday 10:00 AM - 4:00

PM PST, and you can call us at 661-575-0033. You can also use the

BEFORE YOU BEGIN

• Basic plumbing skills are required for installation. If you are unsure of

your abilities to install the system using these instructions please hire a

qualified plumber.

• Read through your parts list and verify all components are accounted

for and in good condition BEFORE scheduling a plumber.

• Please read through the entire instruction manual carefully. If hiring a

plumber ensure they have a copy before they start.

• Most common questions are answered in the instructions or FAQ

section. If you have read both of those and still have questions you may

• Plumbing related questions need to be directed to a locally qualified

plumber. We are not plumbers and any plumbing questions we receive

will not be answered.

PAGE 1
Installation Instructions for Whole House Filters General guideline for setting up a Whole House Cartridge Filter. THANK YOU Thank you for purchasing a new Whole House Filter from Premier Water Systems. We appreciate the opportunity you have given us to provide you with better water. We are committed to providing the best customer experience possible and have provided these installation instructions to make things as simple as possible.
PAGE 2
ASSEMBLY & INSTALLATION INSTRUCTIONS 1. Shut off water supply to house 2. Locate the water line point of entry into the house 3. Determine installation location. Ensure plenty of room for access for later filter changes, and locate in a position where it can be mounted if possible. This will provide extra support to the system. 4. Remove the housing lid(s) from the housing(s). 5.
PAGE 3
9. Filter order will depend upon the number and type of filters on the system. A general rule is that the sediment filter will go first, carbon block or radial flow filters will go second, and any specialty filters (including, but not limited to, GAC, GAC/KDF, activated alumina, calcite, corosex, nitrate, arsenic, tannin, or phosphate) will go last. 10. Ensure all filters are unwrapped. Inspect filters for any cracks, breaks, or other shipping damage.