Manualshelf

Use and Care Guide

ManualsBrandsPremier ManualsAppliancesProSeries 20 in. 2.42 cu. ft. Freestanding Gas Range with Sealed Burners in Stainless Steel
11121314151617181920
INSTALLATION INSTRUCTIONS
1. Position backguard down over flue box onto range main sides. It will be necessary to pull
back on the flue box to allow the backguard pins to clear the range main top. Push backguard
pins into matching holes in range main top.
2. Assemble backguard to range main sides with (2) (A) bolts and (2) (B) nuts each side.
3. From back of range, drive (2) (C) screws through the top edge of the flue box into the range
main top.
4. If backguard has a clock, connect plug from backguard to plug from back of range.
1. Position backguard down over backguard support and flue box. It will be necessary to pull
back on backguard to allow the backguard pins to clear the range main top. Push backguard
pins into matching holes in range main top.
2. Screw (2) (A) black sheet metal screws through backguard end caps into backguard support
ends.
3. From back of range, drive (2) (B) long sheet metal screw through back of backguard end caps
into backguard support.
4. If backguard has a clock, connect plug from backguard to plug from back of range.
1. Position vent rail down onto range main side while pushing the vent rail onto the vent rail
screws.
2. From back of range, screw (2) (A) wing nuts onto the vent rail screws.
3. Drive (2) (B) screws to through vent rail ends to range side panel.
PORCELAIN BACKGUARD
THERMOPLASTIC END BACKGUARD
VENT RAIL BACKGUARD
14