INSTALLATION INSTRUCTIONS PBC- UMW (White) PBC-UMS (Black) PBC UNIVERSAL PROJECTOR MOUNT NORTH AMERICA EUROPE 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614710 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2010 9530-002-021-0A
PBC UNIVERSAL PROJECTOR MOUNT Table of Contents Warning Statements .......................................................................................................................................................... - 2 Parts List ........................................................................................................................................................................... - 3 Installation Tools ...............................................................................
PBC UNIVERSAL PROJECTOR MOUNT Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. Upper Assembly® (Qty 1) Universal Mounting Bracket (Qty 1) #14 x 2” Wood Screws (Qty 3) M2.
PBC UNIVERSAL PROJECTOR MOUNT A B C D E F G H I J K L M Single Wooden Stud Mounts Solid Structure Mounting Points M3 Security Allen Wrench Security Allen Wrench 1.5” nipple (NTP) Tension Knobs Safety Knob Security Screws Leveling Screws Universal Mounting bracket Leg Assembly Projector (not included) Tri-Lock Opening Option 1 A B C C E D G F H K NOTE: The four (two-piece) leg assemblies can be used as single leg or any combination of single and dual legs together as shown in Options 1 and 2.
PBC UNIVERSAL PROJECTOR MOUNT Features Congratulations on your recent purchase of your PBC Universal Projector Mount. This mounting system is designed for projectors weighing 40lbs. (18.14 kg) or less. The mount is easy to install and is loaded with additional installation features built into the mount. These features allow you to optimize the projector’s position to the screen for the best projector performance and picture quality.
PBC UNIVERSAL PROJECTOR MOUNT Projector Preparation Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury and possible damage to the projector. THE PROJECTOR IS FRAGILE. HANDLE WITH CARE AT ALL TIMES. Review the projectors manufacture’s operation manual and refer to the ceiling mounting section of the operator’s manual.
PBC UNIVERSAL PROJECTOR MOUNT B A Upper Assembly Tension Knobs Safety Knob Rotate 180° To unlock C Tri-Lock Opening Figure 2.
PBC UNIVERSAL PROJECTOR MOUNT Bracket Installation Only attach to the projector manufacturer’s specified mounting points on the projector chassis with a minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer as well as the safety instructions outlined in this manual. The two-piece mounting legs are designed to allow for the positioning of each leg around projector air vents located on the base of the projector.
PBC UNIVERSAL PROJECTOR MOUNT Leveling the Mounting Bracket Secure but do not over tighten the mounting hardware. Failure to do so will result in damaging the threads in the projector. Step 1. Rotate the leveling barrels to level the mounting bracket. Step 2. Position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp and filter access doors). Step 3.
PBC UNIVERSAL PROJECTOR MOUNT Securing the Upper Assembly Ceiling Plate Review your projector’s owner’s manual to determine what distance is recommended from the front of the lens to the edge of the screen for best picture ratio. However in most home theater and office ceiling mount installations this is not practical as the projector would be to low within the room.
PBC UNIVERSAL PROJECTOR MOUNT Securing the Projector to the Upper Assembly Step 1. Make sure the three-knurl knobs are loosened to fully expose to the “tri-lock” mounting plate in the base of the upper assembly. Step 2. Carefully lift the projector and insert the mounting bracket mating special tri-lock cutout into the mating portion of the upper assembly. Step 3.
PBC UNIVERSAL PROJECTOR MOUNT Final Adjustments Step 1. With the projector secured in the mount and power on and signal supplied to the projector you can now proceed with the final height, tilt, roll and yaw to optimize the projected image. Wooden Stud A The height can be adjusted by rotating the PBC clockwise (higher) / counterclockwise (lower). Once the height is achieved, tighten the locking set screw using the supplied Security Allen Wrench.
PBC UNIVERSAL PROJECTOR MOUNT Plastic Cap Installation Step 1. Once all the final adjustments have been finished, install the plastic caps on the leveling barrels (Figure 8). Figure 8.
PBC UNIVERSAL PROJECTOR MOUNT Technical Specifications All measurements are in inches (mm) Security 1.5” (NPT) Nipple Figure 9.
PBC UNIVERSAL PROJECTOR MOUNT Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product.