Specifications

PBC UNIVERSAL PROJECTOR MOUNT
Installation Manual Page 6
Projector Preparation
Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered
to. Failure to do so could result in serious personal injury and possible damage to the projector.
THE PROJECTOR IS FRAGILE. HANDLE WITH CARE AT ALL TIMES.
Review the projectors manufacture’s operation manual and refer to the ceiling mounting section of the operator’s
manual. Here you will normally find important reference information regarding installation dimensions such as
(distance from the screen to the lens of the projector, top of the lens placement to the top screen etc. Adherence
to these recommendations during your installation will enhance the quality of your final image on the screen.
Step 1. Carefully invert the projector and place it on a smooth, flat surface.
Step 2. Identify the number of mounting points and screw thread size. Most projectors have either three of four mounting points and
are M4, M5 or M6 in thread size (Figure 1).
Figure 1. Projector Preparation
Step 3. Separate the upper assembly from the projector mounting bracket by slightly loosening the two tension knurl knobs to create
free play between the bracket tri-lock assembly and the upper section tri-lock assembly points (Figure 2A and Figure 2B).
Step 4. Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180° apart and separate (Figure 2C).
Mounting
Points
Blanket/
Soft Cloth
Inverted
Projector
Flat
Surface