Manualshelf

Use and Care Guide

ManualsBrandsPremier ManualsAppliances4 Burners 3.9-cu ft Freestanding Gas Range (Stainless Front with Black Sides and Top) (Common: 30-in; Actual: 30-in)
11121314151617181920
INSTALLATION INSTRUCTIONS
PORCELAIN BACKGUARD INSTALLATION
THERMOPLASTIC END CAP BACKGUARD INSTALLATION
VENT RAIL BACKGUARD INSTALLATION
1. Remove range main top. See Page 11.
2. Position vent rail down over flue box and onto the range main sides.
3. Attach vent rail to range main sides with (1) (A) bolts and (1) (B) nuts each side.
4. Assemble vent rail back tabs to the range main sides with (2) (A) and (2) (B) nuts.
6. Replace range main top.
14
1. Remove range main top. See Page 11.
2. Position backguard down over flue box and onto the range main sides.
3. Attach backguard to range main sides with (2) (A) bolts and (2) (B) nuts each side.
4. Assemble backguard and top edge of the flue box with (2) (A) bolts and (2) (B) nuts.
5. If backguard has a clock, connect plug from backguard to plug from back of range.
6. Replace range main top.
1. Remove range main top. See page 11.
2. Position backguard down over backguard support and flue box.
3. Screw (2) (A) sheet metal screws through backguard end caps into backguard support ends.
4. From rear of unit, screw (2) (B) long sheet metal screws through back of backguard end caps
into backguard support.
5. Assemble backguard and top edge of the flue box with (2) (A) bolts and (2) (B) nuts.
6. If backguard has a clock, connect plug from backguard to plug from back of range.
7. Replace range main top.