Use and Care Guide

CARE AND CLEANING
11
REMOVING MAIN TOP
It is not common to remove the sealed burner main top unless
service is required. To remove top:
1. Pull range away from the wall and disconnect the range
electrical supply and shut off range gas supply.
2. From back of range, some models require removing (2)
screws 1 per side from flue box. See Fig. 1.
3. Remove top burner grates.
4. Remove the burner caps from each top burner.
5. Lift burner base off range main top. On some models the
burner base may be held in place with screws.
6. Remove 2 screws per burner holding the orifice holders to
the range main top. See Fig. 2
7. Lift main top off range by raising the top while pulling for-
ward.
Fig. 1
Fig. 2
Remove (2) screws from each orifice holder.
ORIFICE HOLDER