Instruction manual

P-9
INITIAL SETTINGS
Initial settings page is for you to make your preferred settings up for your player. Once the initial
settings are done they are retained in the CPU of the player until otherwise modified.
COMMON PROCEDURES FOR INITIAL SETTINGS
1. Press SETUP button.
2. Use the navigation buttons to select the item you want to modify, press OK button to confirm,
setting page with further setting items displayed shows on the TV screen. Again use
navigation buttons to make changes. Press again OK button to confirm modifications.
3. Use navigation buttons to switch to another setting on the main setting page.
4. Press SETUP button to exit main setting page.
1. GENERAL SETUP
1.1 TV DISPLAY - it is used to select the TV scan mode, please set as per your TV set.
Options: Normal/Ps
Normal Lb
Wide
1.2 ANGLE MARK - it is used to select whether the multi-angle icon is displayed on the screen
or not when a multi-angle DVD disc is playing.
Options: On-show the angle mark.
Off-hide the angle mark.
1.3 OSD LANGUAGE - it is used to select different On Screen Display language for different
user.
1.4 SCREEN SAVER - when the player is not in used for several minutes, a running DVD logo
will move across the TV screen to protect the TV screen.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
2. AUDIO SETUP (DVD ONLY)
2.1 DOWNMIX
Options: Lt/Rt - Left/Right mix mode
Stereo - Select this option if you don't have a 5.1 channels amplifier.
3. VIDEO QUALITY SETUP
3.1 BRIGHTNESS - to set the brightness for display.
3.2 CONTRAST - to set the contrast effect for display.
3.3 HUE - to set the hue for display.
3.4 SATURATION - to set the saturation for display.
3.5 TV - it is used to set the TV.(The item is only available at TV mode). Highlight the TV item,
and enter it by pressing OK button. There are two items showing on the screen as below:
Auto Search - select it to proceed the auto search.
TV System - it is used to select a corresponding TV system for your TV receiver.