Installation manual
UFA-XL
Page - 6 - Installation Instructions
Support Tube Installation
NOTE: Please refer to the base installation instructions for the assembly of the base and the support tubes. The support tubes and
base must already be assembled.
NOTE
: If the optional shelf has been purchased, the shelf must be attached prior to attaching the UFA-XL bracket arms. Please refer
to the shelf installation instructions. When working with the shelf, take precautions not to scratch it.
Attaching the UFA-XL Mounting Brackets
1. Place the displays side by side on a soft, flat surface. Locate the mounting points that are located on the back of the two displays.
2. Once the mounting points are located, place the UFA-XL bracket arms horizontally over their mounting points.
3. Center the mounting bracket arm on the back of the display.
NOTE: Please refer to ‘Thread Depth Indicator’ on Page 5 to determine the correct hardware.
4. Once the desired position has been determined, place the Griplates™ over each mounting point (flat side down) and secure them
using the appropriate hardware (see Page 4).
5. At this time, center the UFA-XL mounting brackets on the display and tighten the mounting screws.
Nipples Facing Up
M4 M5 M6 M8