Installation Instructions

Surface Preparation
3
The quality of the finished job depends on good preparation of the work surface. Check for low places on the
surface of the wall and build out (shim) if required.
Wood furring is building out the wall surface to provide a smooth even base for nailing on the new siding. Lath
strips are most commonly used. Furring is not usually necessary in new construction. Older homes often have
uneven walls, and furring out low spots or shimming can help prevent a wavy appearance to the siding installation.
Prepare the entire house by replacing rotted wood and securing loose boards.
Make sure you scrape any old paint buildup, old caulking and hardened putty.This is important to do around
windows and doors where it might interfere with the positioning of the new trim.
New caulk should be applied around doors and windows before installation of siding to prevent air infiltration.
Remove downspouts and downspout elbows from the wall so they are not in your way. You may also have to
tie back shrubbery or vegetation to protect it from damage during the installation process.