Interior STEEL WALL & CEILING PANELS The Easy Way to Finish Your Project
Helpful Tools Safety Glasses Tin Snips Drill Gloves Hammer Tape Measure Step ladder Live Load (based on frame spacing) Panel 2 ft 2.5 ft 3 ft 4 ft 5 ft 6 ft 7 ft 7.5 ft 8 ft 9 ft 10 ft Dura Panel 98.3 50.3 29.1 12.3 6.3 3.6 2.3 1.9 1.5 1.1 0.8 Pro-Rib 147.5 75.5 43.7 18.4 9.4 5.5 3.4 2.8 2.3 1.6 1.2 24.6 12.6 7.3 4.6 3.7 3.1 2.2 1.6 Premium Pro-Rib 196.7 100.7 58.
Wall Installation 1 Install J-trim if Large J-trim with Frieze was not installed with the ceiling liner. If using J-trims for the corner, install before panel installation. 4 Overlap next panel and install stitch screws through the overlapped ribs. 2 Start the first panel in a corner with the overlap side of the steel toward the corner. 5 3 Fasten panels by screwing through the flat into studs at 2' on center. 6 Repeat steps 2-4 for each wall until building is fully lined.
Dura-Panel Liner Panel • Economically Priced • Easy Installation • Brightens up the Garage • Saves Energy and Heat Loss • 3X Lighter than Sheetrock • Easy to Keep Clean • Maintenance Free Interior • Matches Pro-Rib Configuration • Stronger and significantly More Durable than Sheetrock • 15 Year Paint Warranty • 30 Gauge White SKU# 155-8085 Galvanized SKU# 155-8080 Pro-Rib Liner Panel • Easy Installation • Saves Energy and Heat Loss • 3X Lighter than Sheetrock • Easy to Keep Clean • Maintenance Free Inter