INSTALLATION INSTRUCTIONS Before Using Your Freezer Remove the exterior and interior packing. Check to be sure you have all of the following parts: 1 Storage Basket 1 Instruction Manual 1 Plastic Scraper(optional) Before connecting the freezer to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth.
The switch overrides the thermostat and will make the compressor operate continuously, lowering the cabinet temperature still further than the thermostat setting. This switch is used to freeze unfrozen food in appreciable quantities. When loading the freezer, freeze only three pounds of fresh food per cubic feet of freezer space at one time. Distribute packages to be frozen evenly throughout the freezer. It is not necessary to adjust the thermostat setting when using the Fast Freeze switch.
freezer, just slide the basket to one side, or lift it out. CARE AND MAINTENANCE Cleaning Your Freezer Upon installation of your new appliance, it is recommended that it be cleaned thoroughly. Turn the temperature control to "OFF", unplug the freezer, remove the food and storage basket. Wash the inside with a damp warm cloth containing a water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. Wash the storage basket with a mild detergent solution.
suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE ÐÎÑÞÔÛÓ ÐÑÍÍ×ÞÔÛ ÝßËÍÛ Freezer does not operate. Not plugged in. The circuit breaker tripped or a blown fuse. The freezer temperature control is set at "0/OFF". Compressor The room temperature is hotter than normal. A large amount of food has been added to the freezer. The door is open too often. The door is not closed completely. The temperature control is not set correctly.
Bubbling or gurgling sound, like water boiling. Refrigerant (used to cool freezer) is circulating throughout the system. This is normal. Vibrations. Check to assure that the freezer is level. Floor is uneven or weak. Freezer rocks on the floor when it is moved slightly. adequately support freezer. Be sure floor can Level the freezer by putting wood or metal shims under part of the freezer. The freezer is touching the wall. Re-level the freezer and move it from the wall.
