Instructions / Assembly

11 CONGLOMKB.COM
Please contact [e-mail] or 1-877-333-0098 for further assistance.
Installation
Installation (continued)
INSTALLING THE CHARCOAL FILTER
(SKIP THIS STEP IF YOU ARE USING EXTERIOR VENTING)
NOTE:
The charcoal lter should only be installed if you are not using an external venting system.
- Turn over the range hood (A) and place its top on a protective surface.
- Unhook the charcoal lter support (9) from the support hook (10) and pull the charcoal lter support up.
- Place the charcoal lter (B) under the charcoal lter support (9). Ensure that the lter is placed horizontally, or the charcoal lter
support (9) will not close properly.
- Slide the charcoal lter support (9) to the left or right in its braces (11) until you can re-hook it on its support hook (10).
B
A
B
10
10
11
11
9
9