MSDS

PRESERVA
®
WOOD STAIN 250 VOC MSDS
PAGE 1 OF 9
MATERIAL SAFETY DATA SHEET
Prepared to U.S. OSHA, CMA, ANSI and Canadian WHMIS Standards
PART I What is the material and what do I need to know in an emergency?
1. PRODUCT IDENTIFICATION
TRADE NAME (AS LABELED): PRESERVA
®
WOOD STAIN 250 VOC
CHEMICAL NAME/CLASS
: Mineral Spirits Solvent and Oil Stain
SYNONYMS:
None
PRODUCT USE
: Wood Stain
SUPPLIER/MANUFACTURER'S NAME
: Preserva Products Ltd.
ADDRESS
: 12860 Earhart Avenue,
Auburn, CA 95602
EMERGENCY PHONE
: 800-797-2537 M-Th, 9am-4pm PST
BUSINESS PHONE
: 800-797-2537 M-Th, 9 am-4pm PST
EMAIL ADDRESS FOR PRODUCT INFORMATION
: info@preservaproducts.com
DATE OF PREPARATION
: April 3, 2011
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2004 format. This product has been classified in accordance with the hazard criteria of
the CPR and the MSDS contains all the information required by the CPR.
2. HAZARD IDENTIFICATION
EMERGENCY OVERVIEW: Product Description: This product is an amber liquid or colored (if pigmented) with a mild solvent
odor. Health Hazards: Inhalation overexposures to the vapors of this product can cause central-nervous system effects (dizziness,
drowsiness, nausea, and headaches). Eye contact can cause moderate to severe irritation. Skin contact may be irritating, especially if
contact is prolonged. Ingestion may cause central nervous system effects. Ingestion of large quantities may be fatal. Ingestion may
lead to aspiration into the lungs. Flammability Hazards: This product is combustible and may form potentially explosive mixtures
with air if subjected to high ambient temperatures or if highly heated. WARNING! Rags, paper or other combustible materials soaked
in this product can cause an extreme fire hazard when not disposed of properly. See Section 7 (Handling and Storage) for more
information. Vapors of this product may travel to a source of ignition and flashback to a leak or open container. If involved in a fire,
this product will release smoke, acrid vapors and toxic gases (i.e., carbon oxides, aromatic hydrocarbons, reactive hydrocarbons and
aldehydes). Reactivity Hazards: This product is not reactive. Release of this product to the environment may cause harm to plants
and animals. Emergency Response Considerations: Emergency responders must wear proper personal protective equipment (and
have appropriate fire protection) suitable for the situation to which they are responding.
3. COMPOSITION and INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS # % w/v
Proprietary Vegetable and Soy Oil Mixture 40-70%
Proprietary Mineral Spirits 15-40%
Proprietary Alkyd Resin 10-30%
Other trace or non-hazardous components. Each of the other components are not hazardous or are present in less than 1 percent concentration (0.1% concentration for
potential carcinogens, reproductive toxins, respiratory tract sensitizers, and mutagens) or do not carry a hazard classification and do not present additional hazards to the
product.
Balance
PART II What should I do if a hazardous situation occurs?
4. FIRST-AID MEASURES
PROTECTION OF FIRST AID RESPONDERS: Rescuers should be taken for medical attention if necessary. Remove or cover gross
contamination to avoid exposure to rescuers.
DESCRIPTION OF FIRST AID MEASURES
: Contaminated individuals must seek medical attention if any adverse effect occurs. Take
a copy of label and MSDS to physician or health professional with the contaminated individual.
Skin Exposure: If this product contaminates the skin and irritation develops, immediately begin decontamination with soap and water. Remove
exposed or contaminated clothing, taking care not to contaminate eyes. The contaminated individual must seek medical attention if adverse effects
continue after flushing.
Eye Exposure
: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient force to open eyelids. Have victim
"roll" eyes. Minimum
flushing is for 20 minutes. The contaminated individual must seek medical attention if adverse effect occurs after flushing.
Inhalation
: If vapors, mists, or sprays of this product are inhaled, remove victim to fresh air. If necessary, use artificial respiration to support vital
functions. Seek medical attention if adverse effect occurs after removal to fresh air.
Ingestion
: If this product is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT INFORMATION. DO
NOT INDUCE VOMITING, unless directly by medical personnel. Have victim rinse mouth with water or give several cupfuls of water, if conscious.
Never induce vomiting or give diluents (milk or water) to someone who is unconscious, having convulsions, or unable to swallow
. If vomiting
occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration.
IMPORTANT SYMPTOMS AND EFFECTS: See Sections 3 (Hazard Identification) and 11 (Toxicological Information).

Summary of content (9 pages)