Owner's Manual

11
3) CHANNEL SELECTOR: t/s keys
- Press the t (3) button to decrease a channel.
- Press the s (3) button to increase a channel.
A «beep» sounds each time the channel changes, if the KEY BEEP
function is activated. See § KEY BEEP page 17.
4) ~ MENU
(short press)
- Turn on the unit.
- Short press the
key (4) to switch on the flashlight.
- Quickly press the s or t key (3) to select between the 4 possible
lights :
- Short press the key (4) to switch off the flashlight.
MENU (long press)
1. Long press the MENU key (4) to enter the MENU.
appears on
the display.
2. Press the s or t key (3) to select the menu to be set.
3. Short press the MENU key (4) to validate the selected menu. The
parameter of the menu blinks.
4. Press the s or t key (3) to change the parameter.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
See § MENU SETTING page 16.
5) SCAN ~ DW
SCAN
(short press)
Short press the SCAN key (5) to activate the SCAN function. Press
the s key (3) to scan in increasing order. Press the t key (3) to
scan in decreasing order.
The scanning stops as soon as there is a busy channel. The
scanning automatically starts 3 seconds after the end of the
transmission and no key is activated during 3 s. The scan also
restarts in increasing order with the s key (3), or in decreasing
order with the t key (3).
English