Owner's Manual

18
*Level 01: 250 ms RX active / 250 ms RX inactive
*Level 02: 250 ms RX active / 500 ms RX inactive
*Level 03: 250 ms RX active / 1 s RX inactive
Note: If level 03 is selected, the transmitting power automatically
changes to L (low). The H (high) power remains available but will
be reseted to L if the device is switched off and then on again.
See HI/LO TRANSMITTING POWER page 15.
5) TONE
This function allows to adjust the reception tone.
1. Long press the MENU key (4) to enter the MENU.
appears on
the display.
2. Press the s or t key (3) to select the
menu.
3. Short press the MENU key (4) to validate. The current value blinks.
4. Press the s or t key (3) to select between the 11 levels from -5
to 5.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default value is 0.
6) EMG SETTING
This function allows to customise both emergency channels.
1. Long press the MENU key (4) to enter the MENU.
appears on
the display.
2. Press the s or t key (3) to select the
menu.
3. Short press the MENU key (4) to validate. 1 blinks.
4. Press the s or t key (3) to change the emergency to be set,or...
5. Short press the MENU key (4) to validate. The current channel
blinks.
6. Press s or t key (3) to select the channel.
7. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
8. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
The default priority channels are channel 9 (1) and channel 19
(2).
See § EMG SETTING page 18.
English