Owner's Manual

20
2. Press the s or t key (3) to select the menu.
3. Short press the MENU key (4) to validate. The channel blinks.
4. Press the s or t key (3) to select the new channel to be watch.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default Dual Watch channel is channel 09.
9) RESET
This function allows to restore all factory parameters.
1. Long press the MENU key (4) to enter the MENU.
appears on
the display.
2. Press the s or t key (3) to select the
menu.
3. Short press the MENU key (4) to validate the menu.
blinks.
4. Short press the MENU key (4) to validate the reset.
5. The unit restarts with all the factory parameters.
F) FUNCTION WITH PTT SWITCH
1) NOISE GATE (PTT + VOX)
- Press and hold the PTT switch (14).
- Short press the VOX key (8) to activate (On) or deactivate (OF)
the NOISE GATE.
is displayed when the function is active.
Noise Gate: Prevents amplification of background noises. This
results in optimized signal levels.
G) CHARGING THE RANDY FCC
1) USING THE AC POWER SUPPLY
1. Clip the home charger (C8) to the bottom of the unit in any sense.
2. Connect the AC power supply (C7) to the home charger (C8).
3. Plug the AC power supply (C7) into a 110/220 V socket.
2) USING THE CAR ADAPTER
1. Clip the home charger (C8) to the bottom of the unit in any sense.
2. Plug the car adapter (C10) to the Home charger (C8).
3. Plug the cigar lighter plug of the car adapter (C10) into your
vehicle.
English