Operation Manual

28
5) TRANSMISSION INDICATOR
is active when the PTT key on the mike (8) is pressed to transmit.
6) AM/FM INDICATORS
Displays the active mode, AM or FM.
7) AM/FM
Allows the selection of AM/FM mode.
8) PTT ON THE MIKE
Press to talk and release to receive a message.
A) Power supply (13,8 V)
B) Antenna connector (SO-239)
C) Jack for external loudspeaker (8


 , Ø 3,5 mm)
FREQUENCY BAND SELECTION
The frequency bands must be chosen according to the country where you are
going to operate. Do not use another configuration. Some countries require
user’s licence.
Procedure :
- Switch off the transceiver
- Switch on the transceiver pressing the key on the mike simultaneously
- The code blinks, release the PTT key of the mike after 3 seconds; the code
blinks more quickly
- Choose the code with the channel rotary selector, then press 2 seconds on
the PTT key of the mike
- Switch off the transceiver, then switch on to confirm the chosen code
FREQUENCY BAND TABLE
Code Country
01 Italy 40 CH AM/FM 4 Watt
02 Italy 34 CH AM/FM 4 Watt
03 Germany 80 CH FM 4 Watt/ 40 CH AM 1 Watt
04 Germany 40 CH FM 4 Watt/ 40 CH AM 1 Watt
05 Europe 40 CH FM 4 Watt/ 40 CH AM 1 Watt
06 CEPT 40 CH FM 4 Watt
07 Spain 40 CH AM/FM 4 Watt
08 France 40 CH FM 4 Watt / 40 CH AM 1 Watt
09 Poland 40 CH AM/FM 4 Watt (-5KHz)
00 England 40 CH FM 4 Watt English frequencies /
CEPT 40 CH FM 4 W
Remark : Code 00
- in order to select the English channels, put the AM/FM switch on FM. The AM
indicator lights up.
- in order to select the FM CEPT frequencies, put the AM/FM switch on AM. The
FM indicator lights up.
English