Owner`s manual

English

MOUNTING

DIAGRAM

Welcome to the world of the new generation of CB radios. The

new PRESIDENT range gives you access to top performance CB

equipment. With the use of up-to-date technology, which guar-

antees unprecedented quality, your PRESIDENT HARRY II ASC is a

new step in personal communication and is the surest choice for

the most demanding of professional CB radio users. To ensure that

you make the most of all its capacities, we advise you to read

carefully this manual before installing and using your PRESIDENT

HARRY II ASC.

A) INSTALLATION:

1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO:

a)You should choose the most appropriate setting from a simple and practical point of

view.

b) Your CB radio should not interfere with the driver or the passengers.

c) Remember to provide for the passing and protection of different wires (e.g. power,

antenna, accessory cabling) so that they do not in any way interfere with the driving

of the vehicle.

d) To install your equipment, use the cradle (1) and the self-tapping screws [2] provided

(drilling diameter 3.2 mm). Take care not to damage the vehicle’s electrical system

while drilling the dash board.

e) Choose where to place the microphone support and remember that the micro-

phone cord must stretch to the driver without interfering with the controls of the

vehicle.

- N.B. : As the transceiver has a frontal microphone socket, it can be set into the dash

board. In this case, you will need to add an external loud speaker to improve the

sound quality of communications (connector EXT.SP situated on the back panel: C).

Ask your dealer for advice on mounting your CB radio.