HERBERT Manuel d'utilisation / Manual del usuario Owner's manual / Handbuch
Votre PRESIDENT HERBERT ASC en un coup d'oeil Un vistazo a vuestro PRESIDENT HERBERT ASC Your PRESIDENT HERBERT ASC at a glance Ihr PRESIDENT HERBERT ASC auf einen Blick 2
is SOMMAIRE França SUMARIO ol Españ INSTALLATION 5 INSTALACIÓN 15 UTILISATION 7 UTILIZACIÓN 17 CARACTÉRISTIQUES TECHNIQUES 9 CARACTERÍSTICAS TÉCNICAS 19 GUIDE DE DÉPANNAGE 9 GUÍA DE PROBLEMAS 19 COMMENT ÉMETTRE/RECEVOIR UN MESSAGE 10 COMO EMITIR O RECIBIR UN MENSAJE 20 GLOSSAIRE 10 LÉXICO 20 GARANTIE 12 GARANTÍA 22 MODELE HERBERT FM 42 CERTIFICADO DE ACEPTACION 40 TABLEAU DES FRÉQUENCES 46 DECLARACIÓN CE DE CONFORMIDAD 41 TABLA DE FRECUENCIAS 46 SUMMARY h Englis
Français ATTENTION ! Avant toute utilisation, prenez garde de ne jamais émettre sans avoir branché l'antenne (connecteur "B" situé sur la face arrière de l'appareil), ni réglé le TOS (Taux d'Ondes Stationnaires)! Sinon, vous risquez de détruire l'amplificateur de puissance, ce qui n'est pas couvert par la garantie.
1 Bienvenue dans le monde des émetteurs-récepteurs CB de la dernière génération. Cette nouvelle gamme de postes vous fait accéder à la communication électronique la plus performante. Grâce à l’utilisation de technologies de pointe garantissant des qualités sans précédent, votre PRESIDENT HERBERT ASC est un nouveau jalon dans la convivialité et la solution par excellence pour le pro de la CB le plus exigeant.
c) Antenne fixe : - Veillez à ce qu’elle soit dégagée au maximum. En cas de fixation sur un mât, il faudra éventuellement haubaner conformément aux normes en vigueur (se renseigner auprès d’un professionnel). Les antennes et accessoires que nous distribuons sont spécialement conçus pour un rendement optimal de chaque appareil de la gamme. 2) INSTALLATION DE L’ANTENNE : Français a) Choix de l’antenne : - En CB, plus une antenne est grande, meilleur est son rendement.
d) Branchez le fil rouge (+) à la borne positive de la batterie et le fil noir (-) à la borne négative de la batterie. e) Branchez le cordon d’alimentation au poste. 1) MARCHE/ARRET - VOLUME : ATTENTION : Ne jamais remplacer le fusible d’origine (2 A) par un modèle d’une valeur différente ! a) Pour allumer votre poste, tourner le bouton (1) dans le sens des aiguilles d’une montre. b) Pour augmenter le volume sonore, continuer à tourner ce bouton dans le sens des aiguilles d’une montre.
5) SÉLECTEUR DE CANAUX : Touches «CH ▲» et «CH ▼» sur le micro et ROTACTEUR en facade : 9) MODE : Français Ce commutateur permet de sélectionner le mode de modulation AM, FM. Votre mode de modulation doit correspondre à celui de votre interlocuteur. A/ Modulation d’amplitude/AM : Communications sur terrain avec reliefs et obstacles sur moyenne distance (mode le plus utilisé en France). B/ Modulation de fréquence/FM : Communications rapprochées sur terrain plat et dégagé.
Passer en émission, une pression sur SWR active la fonction, et SWR apparaît sur l’afficheur. La valeur du TOS se lit sur l’échelle inférieure du barre-graphe. Une nouvelle pression désactive la fonction, et SWR disparaît. 1) GÉNÉRALES : 14)PA (Public Address) : - Un haut-parleur de sonorisation extérieure peut être connecté sur le PRESIDENT HERBERT ASC par une prise jack située sur le panneau arrière PA.SP (E).
canal d’appel (19, 27), et que la communication est établie avec votre interlocuteur, il est d’usage de choisir un autre canal disponible afin de ne pas encombrer le canal d’appel. D) GUIDE DE DÉPANNAGE : Français 1) VOTRE POSTE N’ÉMET PAS OU VOTRE ÉMISSION EST DE MAUVAISE QUALITÉ : F) GLOSSAIRE : Vérifiez que : - la fonction PA ne soit pas activée. - l’antenne soit correctement branchée et que le TOS soit bien réglé. - le micro soit bien branché.
UHF USB VHF : Taux d’ondes stationnaires : Transceiver.Désigne un poste émetteur-récepteur CB. Indique aussi l’émission.
VOLET A CONSERVER CONDITIONS GENERALES DE GARANTIE Ce poste est garanti 2 ANS pièces et main d'oeuvre dans son pays d'achat Vous venez de faire confiance à la qualité et à l'expérience de PRESIDENT et nous vous remercions. Pour que vous soyez pleinement satisfait de votre achat, nous vous conseillons de lire attentivement ce manuel.
VOLET A RENVOYER QUESTIONNAIRE CB CONFIDENTIEL SOUS ENVELOPPE Nom......................................................Prénom................................... Adresse................................................................................................ ............................................................................................................. Ville......................................Code postal.................Tel........................
Español ¡ ATENCIÓN ! Antes de la utilizacíon tengan cuidado de nunca emitir sin haber previamente conectado la antena (conector "B" situado en la parte trasera de su equipo), ajustado el ROE (Relación de Ondas Estacionarias)! Sinó, se expone a dañar el amplificador de potencia, no cubierto por la garantía.
Bienvenido al mundo de los emisores-receptores CB de la última generación. Esta nueva gama de aparatos os hace entrar en la comunicación electrónica más avanzada. Gracias a la utilización de tecnologías de vanguardia garantizando calidad sin precedentes, vuestro PRESIDENT HERBERT ASC es un nuevo hito en la comunicación y la solución por excelencia para el pro del CB más exigente.
c) Antena fija: - Vigilar que ésta esté libre de obstáculos al máximo. En caso de fijación sobre un mástil. Se hará conforme a las normas en vigor (infórmese dirigiendose a un profesional). Las antenas y accesorios PRESIDENT estan especialmente construidos para un rendimiento óptimo en cada aparato de la gama. 2) INSTALACIÓN DE LA ANTENA: a) Elección de la antena: - En la CB, cuanto más larga sea la antena, mejor en su rendimiento. Vuestro suministrador os orientará en la elección.
ATENCIÓN: ¡No reemplace jamás el fusible de origen (2 A) por un modelo de un valor diferente! 4) OPERACIONES DE BASE A EFECTUAR ANTES DE LA PRIMERA UTILIZACIÓN, SIN UTILIZAR LA EMISIÓN (sin apoyar sobre el botón del micro): a) Conectar el micro. b) Verificar la conexión de la antena. c) Puesta en marcha del aparato, girar el botón VOLUME en el sentido inverso de las agujas del reloj. d) Girar el botón silenciador SQUELCH al máximo (en el sentido inverso de las agujas del reloj).
5) SELECTOR DE CANALES: Teclas «CH ▲ » y «CH ▼ » y CONMUTADOR ROTATIVO: Vuestro modo de modulación debe corresponder al de vuestro interlocutor. A/ Modulación de amplitud/AM: Comunicaciones sobre el terreno con relieve y obstáculos sobre mayor distancia. B/ Modulación de frecuencia/FM: Comunicaciones cercanas sobre el terreno llano y libre. Mejor calidad de comunicación (regulación más delicada del squelch).
14)PA (Public Address): C) CARACTERISTÍCAS TÉCNICAS: Un altavoz para megafonía exterior puede ser conectado sobre el PRESIDENT HERBERT ASC por una toma jack situada sobre el panel posterior PA.SP (E). Al pulsar la tecla PA, el mensaje emitido por el microfono sera dirigido hacia el altavoz y amplificado. Colocar el micrófono a una distancia adecuada para hablar con el fin de evitar el efecto Larsen. Una presión sobre el botón activa esta función, PA aparece en la pantalla. El resto se detiene.
D) GUIA DE PROBLEMAS: F) LÉXICO: Durante la utilización de su emisora, descubrirán un lenguaje particular empleado por algunos cebeistas. Para ayudarles a entenderlo mejor, le damos, en el léxico y el codigo «Q», un recapitulativo de las palabras utilizadas. Sin embargo, es evidente que un lenguaje claro y preciso facilitará el contacto entre los aficionados de radiocomunicación.
: : : : : : : : : : : : : : : : : : : : : : : : : : : Teléfono Hablar emitiendo Conforme, de acuerdo Conforme Megafoníz Micrófono Apartado de Correos Padres Lugar de reunión Guardia Civil Recibido Receptor Marido, novia Amplificador lineal Televisión Radioescucha Transmisor Encontrarse en persona Teléfono Comer, cenar Watios Amplificador lineal Saludos amistosos Abrazos Mucho éxito Saludos Besos y cariños : : Nombre de estación u operador Distancia aproximada en línea recta entre estaciones Frecuencia ex
PARTE A CONSERVAR CONDICIONES GENERALES DE GARANTÍA Este equipo tiene una garantía de 2 AÑOS piezas y mano de obra en el país de su compra que ampara cualquier defecto de fabricación que sea reconocido por Usted ha confiado en la experiencia y calidad de PRESIDENT y se lo agradecemos. Para que quede totalmente satisfecho de su compra, aconsejamos leer atentamente este manual.
A REMITIR CUESTIONARIO CB CONFIDENCIAL RESPUESTA VIA CORREO Nombre.......................................................Apellido................................... Dirección................................................................................................. ............................................................................................................. Ciudad..............................Codigo postal.................Tel.........................
WARNING ! English Before using, be careful never to transmit without first having connected the antenna (connection "B" situated on the back panel of the equipment) or without having set the SWR (Standing Wave Ratio) ! Failure to do so may result in destruction of the power amplifier, which is not covered by the guarantee. The guarantee of this transceiver is valid only in the country of purchase .
Welcome to the world of the new generation of CB radios. The new PRESIDENT range gives you access to top performance CB equipment. With the use of up-todate technology, which guarantees unprecedented quality, your PRESIDENT HERBERT ASC is a new step in personal communication and is the surest choice for the most demanding of professional CB radio users. To ensure that you make the most of all its capacities, we advise you to read carefully this manual before installing and using your PRESIDENT HERBERT ASC.
2) ANTENNA INSTALLATION: 3) POWER CONNECTION: Your PRESIDENT HERBERT ASC is protected against an inversion of polarities. However, before switching it on, you are advised to check all the connections. Your equipment must be supplied with a continued current of 12 volts (A). Today, most cars and lorries are negative earth. You can check this by making sure that the negative terminal of the battery is connected either to the engine block or to the chassis.
4) BASIC OPERATIONS TO BE CARRIED OUT BEFORE USING YOUR SET FOR THE FIRST TIME (without transmitting and without using the «push-to-talk» switch on the microphone): B) HOW TO USE YOUR CB: a) Connect the microphone b) Check the antenna connections c) Turn the set on by turning the knob VOLUME clockwise. d) Turn the SQUELCH knob to minimum (anti-clockwise). Adjust the volume to a comfortable level. e) Go to Channel 20 using either the «CH ▲» «CH ▼» key on the microphone or the rotary knob.
«CH ▼» key : one quick press allows you to go down by one channel, continued pression allows you to descend five channels per second. «CH ▲» key : one quick press allows you to go up by one channel, continued pression allows you to ascend five channels per second. are obstacles and over medium distances. B/ Frequency Modulation (FM) is for nearby communications in flat, open areas. It gives better quality of communication (squelch adjustment needs more finesse).
To activate this function, press the PA key. “PA” appears in the display. The PA volume is controlled by the MIC GAIN knob. To cancel PA, press the PA key and the set returns to the previous configuration. C) TECHNICAL CHARACTERISTICS: 1) GENERAL: 15)NB/ANL: - Noise Blanker/ Automatic Noise Limiter. These filters allow the reduction of back ground noise, and some reception interference. AM Mode (NB and ANL active) Press this key once to activate the NB filter. “NB” appears in the display.
D) TROUBLE SHOOTING: 1) F) GLOSSARY: Below you will find some of the most frequently used CB radio expressions. Remember this is meant for fun and that you are by no means obliged to use them. In an emergency, you should be as clear as possible. YOUR CB RADIO WILL NOT TRANSMIT OR YOUR TRANSMISSION IS OF POOR QUALITY: INTERNATIONAL PHONETIC ALPHABET: - Check that the PA function is not activated - Check that the antenna is correctly connected and that the SWR is properly adjusted.
: : : : : : : : Blocking the channel : Blue boys : Break : Breaker : Clean and green : Cleaner channel : Coming in loud and proud : Doughnut : Down and gone : Down one : Do you copy? : DX : Eighty eights : Eye ball : Good buddy : Hammer : Handle : Harvey wall banger : How am I hitting you? : Keying the mike : Kojac with a kodak : Land line : Lunch box : Man with a gun : Mayday : Meat wagon : Midnight shopper : Modulation : Negative copy : Over your shoulder : Part your hair : Pull your hammer back : Rat ra
ACHTUNG ! Bevor Sie das Gerät benutzen, geben Sie acht, daß eine Antenne angeschloßen ist. (Stecker "B" auf der hinteren Seite des Gerät). Vergessen Sie nicht das Stehwellenverhältnis einzustellen (SWR). Sonst ist das Risiko den Verstärker zu zerstören, was nicht von der Garantie anerkannt wird. Deutsch Dieses Gerät ist im Land des Ankaufs garantiert.
1 Willkommen in der faszinierenden Welt des CB-Funks und Herzlichen Glückwunsch zu Ihrem CB-Funkgerät PRESIDENT HERBERT ASC. Sie haben sich damit für ein komfortables Spitzengerät entschieden, das über zahlreiche Zusatzfunktionen verfügt und sich sowohl im Auto als auch als Feststation von zu Hause aus einsetzen läßt. Weitere Kennzeichen sind einfache Bedienbarkeit und robuster Aufbau.
c) Feststations-Antenne: - Mit einer Feststations-Antenne erreichen Sie mit Ihrem Funkgerät die maximale Reichweite. Bei Außenantennen müssen Sie unbedingt die einschlägigen VDE-Bestimmungen (Blitzschutz!), der Statik und des Baurechtes beachten! Am besten, Sie lassen die Antennenanlage in diesem Fall von einem Fachmann montieren! Im PRESIDENT-Zubehörprogramm finden Sie eine Auswahl auch von Feststations-Antennen.
- Nehmen Sie die Messung des SWR und die Abstimmung der Antenne auf niedrigstes SWR vor. - Auch hier gilt: Je niedriger das SWR, desto besser die Antennenanpassung. Ideal ist ein SWR-Wert von 1. Werte zwischen 1 und 1,8 sind noch akzeptabel. Nach der Abstimmung der Antenne ist Ihre CB-Funkstation betriebs-bereit! Minuspol (Masse). d) Schließen Sie die freien Enden des Stromversorgungskabels mit entsprechenden Klemmen direkt an der Batterie an: Rot = Pluspol, Schwarz = Minuspol (Masse).
4) Ton-Regler: 9) MODE (Betriebsart): Mit diesem Regler können Sie die Klangfarbe veränderen. Drehen Sie den Regler im Uhrzeigersinn so wird der Klang dunkler - entgegengesetzt wird er heller. Diese Umschalter gibt Ihnen die Möglichkeit die Modulationsart zu ändern. AM/FM Ihre Modulationsart muß mit Ihren Gesprächspartner einstimmen : A/ Amplituden-Modulation/AM: Für Sendungen auf unebenen Relief mit Hindernissen auf mitlerer Distanz. B/ Frequenz-Modulation/FM: Für nah Gespräche auf freien Gelände.
14)PA (DurchsageVerstärker): C) TECHNISCHE DATEN: Ihr Funkgerät läßt sich zusammen mit einem (externen) Lautsprecher auch für Durchsagen als «Megaphon» benutzen. Schließen Sie hierzu an der Buchse PA.SP (E) auf der Rückseite Ihres Funkgerätes einen passenden (Außen-) Lautsprecher an. 1) ALLGEMEIN: - Drücken Sie die Taste PA, um die Funktion «Durchsage-Verstärker» zu aktivieren (Anzeige PA). Sprechen Sie in das Midrofon und relgeln Sie die WiedergabeLautstärke mit dem Regler MIC-GAIN.
3. Nur wenn der Kanal völlig frei ist, den eigenen Anruf starten. 4. Immer nur kurz rufen. 5. Nach jedem Anruf sorgfältig hören, ob eine Station antwortet. Erst dann den Anruf wiederholen. 6. Nach jedem Durchgang der Gegenstation immer erst einige Sekunden Pause lassen, bevor man selber spricht, damit sich auch andere Stationen melden können («Umschalt-pause»).
73 88 99 R/S-Code: R = Lesbarkeit 1 2 3 4 5 nicht lesbar, unverständlich zeit-oder teilweise lesbar schwer lesbar lesbar, verständlich gut lesbar S = Signalstärke 1 2 3 4 5 6 7 8 9 kaum hörbar sehr schwach hörbar schwach hörbar ausreichend hörbar ziemlich gut hörbar gut hörbar mäßig stark hörbar stark hörbar sehr stark hörbar Q-GRUPPEN: Beim CB-Funkverkehr werden sehr häufig Abkürzungen verwendet.
DE CONFORMIDAD Balaruc, el 10 de diciembre 1996 Place, date and signature : Lugar, fecha y firma : P/O Michel FABRI GPE, ALBERT BERTRANA, Director técnico Name and title of subscriber : Nombre y titulo del firmante : pr ETS 300 680 part 1, part 2 (junio 95) is in compliance with following norms or documents : es conforme a las normas o a los documentos siguientes : Emisora CB President HERBERT We declare, under our own responsability that the following product : Declaramos, bajo nuestra res
Modèle HERBERT FM APPAREIL CONFORME A LA NORME EUROPEENNE ETS 300 135 : 40 CANAUX, 4 W FM AGREMENT DGPT Nº 96 0148 CB 0 Additif à la notice d'utilisation fournie avec l'appareil : PAGE 8 : PAGE 9 : 7) La touche de fonction CH 19/9 (7) active le D) CARACTÉRISTIQUES TECHNIQUES : 9) canal 19 FM ou 9 FM. La touche de fonction MODE (9) est inopérante.
Model HERBERT FM TRANSCEIVER IN ACCORDANCE WITH THE EUROPEAN STANDARD ETS 300 135 : 40 CHANNELS, 4 W FM APPROVAL DGPT Nº 96 0148 CB 0 Addition to the service manual supplied: PAGE 28: PAGE 29: 7) D) TECHNICAL SPECIFICATIONS : 9) The CH 19/9 (7) function key activates the CH 19 FM or 9 FM. The MODE (9 function key) is inoperative. 1) GENERAL: - Approval DGPT N° - Channels - Modulation modes 10) The DW (10) function key activates dual watch between channel 19 FM or 9 FM and the current channel.
Modell HERBERT FM GERÄT IN UBEREINSTIMMUNG MIT DER EUROPÄISCHEN NORM ETS 300 135: 40 KANÄLE, 4 W FM ZULASSUNG DGPT No 96 0148 CB 0 ZUSATZ ZUM HANDBUCH GELIEFERT MIT DEM GERÄT: SEITE 36 : SEITE 37 : 7) Die Kanäle 19 und 9 FM können Sie mit einem einzigen Tastendruck sofort schalten. D) TECHNISCHE DATEN: 9) Die Umschalter MODE (9) funktioniert nicht.
NOTES 45
PRISE MICRO 6 BROCHES CONEXIÓN DEL MICRO 6 PINS 6-PIN MICROPHONE PLUG BELEGUNG DER MIKRO-FONBUCHSE (sechspolig) FREQUENCY TABLES CB-KANÄLE UND IHRE FREQUENZEN TABLEAU DES FRÉQUENCES TABLA DE FRECUENCIAS N° du canal N° Canal Channel Kanal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Fréquences Frecuencia Frequency Frequenzens 26,965 MHz 26,975 MHz 26,985 MHz 27,005 MHz 27,015 MHz 27,025 MHz 27,035 MHz 27,055 MHz 27,065 MHz 27,075 MHz 27,085 MHz 27,105 MHz 27,115 MHz 27,125 MHz 27,135 MHz 27,155 MH
0249/04-01 SIEGE SOCIAL/HEAD OFFICE - FRANCE Route de Sète - BP 100 - 34540 BALARUC Site Internet : http://www.president-electronics.com E-mail : groupe@president-electronics.