Operation Manual

- 14 -
CONTROLS AND FUNCTIONS
English
LED (4) DEFINITIONS
Color Status Meaning
Green Solid On Linked, battery charged
Red Solid On Linked, low battery
All Off Powered down
Green Long Flash Transmitting, battery charged
Red Long Flash Transmitting, low battery
Green Short Stutter Registration mode, battery charged
Red Short Stutter Registration mode, low battery
Orange/Green Short Flash Not linked, battery charged
Orange/Red Short Flash Not linked, low battery
Green/Red Long Flash Charging, battery not full
All Long Flash Unregistered
LIBERTY-MIC OPERATION
SETTING UP YOUR MICROPHONE
Install batteries in mic
1. Remove the back battery cover.
2. Insert the Ni-MH (E) battery, connecting it to the mic at the plug.
3. Replace the back cover.
4. Use the DC charger (D) to charge battery completely before using.
Mount the microphone cradle
1. Mount the cradle (B) using the supplied screws.
2. Disconnect the current wired mic
3. Connect cradle (B) in place of the microphone.
4. Turn on CB. The cradle LED (4) ashes red while it powers up, then becomes solid red.
1 - PUSH-T0-
TALK button
2 - SYNC/
Power On/Off
button
3 - Mini-USB Charging Port
6 - Speaker
5 - Microphone
4 - LED
7 - VOL UP
button
8 - VOL
DOWN
button
9 - LED
10 - FIND/
SYNC
Button
Wireless microphone
Cradle
11 - audio
plug