Operation Manual

29
Welcome to the world of the new generation of transceiver radios. The new
PRESIDENT range gives you access to top performance transceiver equipment.
With the use of up-to-date technology, which guarantees unprecedented
quality, your PRESIDENT LINCOLN II ASC is a new step in personal communica-
tion and is the surest choice for the most demanding of radioamateur users.
To ensure that you make the most of all its capacities, we advise you to read
carefully this manual before installing and using your PRESIDENT LINCOLN II ASC.
A) INSTALLATION
1) WHERE AND HOW TO MOUNT YOUR TRANSCEIVER
a) You should choose the most appropriate setting from a simple and practical
point of view.
b) Your transceiver radio should not interfere with the driver or the passengers.
c) Remember to provide for the passing and protection of different wires (e.g.
power, antenna, accessory cabling) so that they do not in any way interfere
with the driving of the vehicle.
d) To install your equipment, use the cradle (1) and the self-tapping screws (2)
provided (drilling diameter 3.2 mm). Take care not to damage the vehicle’s
electrical system while drilling the dash board.
- N.B. : As the transceiver has a frontal microphone socket, it can be set into
the dash board. In this case, you will need to add an external loud speaker to
improve the sound quality of communications (connector EXT SP situated on
the back panel: C). Ask your dealer for advice on mounting your transceiver
radio.
2) ANTENNA INSTALLATION
a) Choosing your antenna
- For transceiver radios, the longer the antenna, the better its results. Your dealer
will be able to help you with your choice of antenna.
b) Mobile antenna
- Must be fixed to the vehicle where there is a maximum of metallic surface
(ground plane), away from windscreen mountings.
- If you already have a radio-telephone antenna installed, the transceiver
antenna should be higher than this.
e) Do not forget to insert the rubber joints (3) between the transceiver and its
support as these have a shock-absorbing effect which permits gentle orienta-
tion and tightening of the set.
f) Choose where to place the microphone support and remember that the
microphone cord must stretch to the driver without interfering with the controls
of the vehicle.
English