Operation Manual

11
Selecting level
> Start position
- Press F (3) + t (5) buttons to set the Squelch Level.
> SL 01 is displayed and “Sq ” icon is blinking.
- Press s (5) or t (8) buttons for selecting Squelch Level from oF to 06.
- Press F (3) button to save the Squelch Level setting and go to Battery Saving
setting mode.
- Press any other button except s (5) or t (8) to return to operating mode.
13.2 BATTERY POWER SAVE
> Start position
- Press F (3) + t (5) buttons to set the Squelch Level.
- Press F (3) button to set the Power Save.
> PS 01 and are displayed.
- Press s (5) or t (8) buttons for selecting Power Save setting 1, 2, 3 or 0 (=off)
- Press F (3) button to save the Power Save setting and go to Beep Tone setting
mode.
- Press any other button except s (5) or t (8) to return to operating mode.
13.3 BEEP TONE
- Press F (3) + t (5) buttons to set the Squelch Level.
- Press F (3) button two times to set the Beep Tone.
- Press s (5) or t (8) buttons for setting the Beep Tone on or off.
When Beep Tone is on, a beep tone is heard when a button is pressed except
PTT (2) and SQ (4) buttons.
- Press F (3) button to save the Beep Tone setting and go to Squelch Level
setting mode.
- Press any other button except s (5) or t (8) to return to operating mode.
Note:
During the menu setting, if no button is pressed within 10 seconds, the radio
will return to operating mode without storing the setting.