Operation Manual

8
E) FUNCTION DESCRIPTION
1) ON/OFF – VOLUME
- Turn On/Off-Volume knob (12) clockwise for setting the unit on and increase
the volume. Every time the radio is switched on, the display will show the
active band for 3 seconds. Turn On/Off-Volume knob (12) anticlockwise for
decreasing the volume and setting the unit off.
2) CHANNEL SELECTOR: s / t keys
- Press t (5) or s (8) button to decrease or increase a channel.
3) KEY LOCK
- Press t (5) more than 3 seconds for setting the Key lock on or off.
- When key lock is on, the icon is displayed and all keys are locked except
PTT (2).
4) DISPLAY BACK LIGHT
- Pressing F (3) + P (7) buttons to set the display backlight on or off.
- When the display backlight is set on, the lightning time is 10 seconds.
- Every time a button is pressed, except PTT (2), the lightning time is for more
10 seconds,
5) SCAN FUNCTION
5.1 Scan Channel List
Before operating the scan function, users have to edit
one channel, besides the default priority channel, in
scan list. Channels at scan list are marked with “
” icon on the display. The channels at the scanning list are scanned when
scanning and the “ ” icon blink.
5.2 Adding a channel to the scanning list
- Select a channel with s or t button to choose the channel that you want
set.
- Press F (3) + A/F (6) buttons to add the channel to scan list.
- The channel is the list have a “ ” icon displayed.
5.3 Deleting a channel from the scanning list
- Select a channel with s or t button.
- Press F (3) + A/F (6) buttons to delete the channel from the list. The “ ” icon
disappears.
5.4 Scanning On/Off
- Press A/F (6) button more than 3 seconds for begin to scan. The transceiver
start to scroll through the channels in scan list (the “ ” icon start blinking). It
could scan minimum 5 channels per second.
- When signal received, it will stop at that channel and you can hear voice
from speaker. When signal disappears, it will continue to scan after 5 seconds.