User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 Studio 192 and Studio 192 Mobile Hardware Features
- 1.3 UC Surface Features
- 1.4 Studio One Artist Features
- 1.5 What is in the Box
- 2 Hookup
- 2.1 Front Panel Connections and Controls
- 2.2 Back Panel Connections
- 2.3 Connection Diagrams
- 2.3.1 Studio 192
- 3.2.1 Studio 192 Mobile
- 3 Connecting to a Computer
- 3.1 Installation for Windows
- 3.2 Installation for Mac OS X
- 3.3 Using the Studio 192-series interfaces with Popular Audio Applications
- 3.4 Controlling Studio 192-Series Mic Preamps from your DAW
- 4 UC Surface Monitor Control Software
- 4.1 UC Surface Launch Window
- 4.2 UC Surface Mix Controls
- 4.2.1 Channel Controls
- 4.2.2 Channel Detail
- 4.3 Dynamics Processing and EQ
- 4.3.1 Dynamics Tab
- 4.3.2 EQ Tab
- 4.3.3 Fat Channel Presets
- 4.4 Adding Effects
- 4.4.1 Editing Effects and Effects Presets
- 4.4.2 Reverb and its Parameters
- 4.4.3 Delay and its Parameters
- 4.4.4 Reverb Effects Presets Library
- 4.4.5 Delay Effects Preset Library
- 4.4.6 Digital Effects Types
- 4.5 Main Options
- 4.6 Quick Controls: Talkback, Scenes, and More
- 4.6.1 Talkback
- 4.6.2 Quick Scenes, Mute Groups, and Scene Library
- 4.7 The Settings Page
- 4.7.1 Device Settings Tab: System Settings
- 5 Studio One Artist Quick Start
- 5.1 Installation and Authorization
- 5.2 Setting Up Studio One
- 5.2.1 Configuring Audio Devices
- 5.2.2 Configuring MIDI Devices
- 5.3 Creating a New Song
- 5.3.1 Configuring Your I/O
- 5.3.2 Creating Audio and MIDI Tracks
- 5.3.3 Recording an Audio Track
- 5.3.4 Adding Virtual Instruments and Effects
- 5.4 Monitor Mixing with Z-Mix
- 5.4.1 Z-Mix Functions
- 5.4.2 Punching In
- 6 Technical Information
- 6.1 Specifications
- 7 Warranty Information
- 7.1 How Consumer Law Relates To This Warranty
12
3 Connecting to a Computer
3 .3 Using the Studio 192-series interfaces with Popular Audio Applications
Studio 192 and Studio 192 Mobile
Owner’s Manual
Apple Logic
1. Launch Logic.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select PreSonus Studio 192 from the device menu.
6. You will be asked if you’d like to relaunch Logic. Click try (re)launch.
7. Your Studio 192 features custom I/O labels for faster workflow. To enable
these labels for use in Logic, go to Options | Audio | I/O Labels.
8. The second column in the pop-up window will be named
Provided by Driver. Activate each of these labels for your
Studio 192. When you are done, close this window.
Avid Pro Tools 10+
1. Launch Pro Tools.
2. Go to Setup | Hardware and select Studio 192 from the Peripherals list. Click OK.
3. Go to Setup | Playback Engine and select Studio 192 from
the menu at the top of the window. Click OK.
Cakewalk Sonar
1. Launch Sonar.
2. Go to Options | Audio... and click on the Advanced tab.
3. Change the Driver Mode to “ASIO.” (Note: Using WDM, rather than
ASIO, for pro audio applications is not recommended.)
4. Click the “OK” button.
5. Restart Sonar.
6. Go to Options | Audio... and click on the Drivers tab.
7. Highlight all input and output drivers beginning with “PreSonus Studio 192.”
8. Go to Options | Audio... and click on the General tab.
9. Set the Playback Timing Master to “PreSonus Studio 192... DAW Out 1.”
10. Set the Recording Timing Master to “PreSonus Studio 192... Mic/Inst 1.”
Steinberg Cubase
1. Launch Cubase.
2. Go to Devices | Device Setup.
3. Select “VST Audio System” from the Devices column in the Device Setup.
4. Select PreSonus Studio 192 from the ASIO Driver dropdown list.
5. Click “Switch” to begin using the Studio 192 driver.
6. Once you have successfully changed the driver, go to Devices |
VST Connections to enable your input and output buses.