User Manual

.
2
6
3
1
4
5
1. Connect a TRS cable to the Comp Link connection
of the back of both of the ADL 700s.
2. Determine which unit you would like to be the
slave and turn its Threshold knob to the ST
position.
3. The Link LED will illuminate when Stereo Link
mode is enabled.
4. The compressor controls on the slaved unit will
no longer have any effect on the audio.
5. Use the Threshold, Attack, Release, and Ratio
controls on the master unit to adjust the compres-
sor setting for both units. Adjust the Make-up
Gain as necessary on both units.
6. When you want to disable Stereo Link mode,
simply turn the Threshold knob on the slaved
unit to any position other than ST. You do not
have to disconnect the TRS connection to disable
Stereo Link mode.
12
2 Hookup
2.8 Stereo Linking Two ADL 700s
ADL 700
Owner’s Manual