User Manual
Table Of Contents
- 1 Overview
- 1.1 Introduction
- 1.2 Product Registration
- 1.3 What’s in the box
- 1.4 What’s in your MyPreSonus account
- 1.5 Companion PreSonus Products
- 1.6 Firmware Updates
- 2 Standard Controller Mode
- 2.1 Setup Mode
- 2.2 Pads
- 2.2.1 RGB Colors
- 2.2.2 Triggering Notes
- 2.2.3 Plus and Minus Pads
- 2.3 Touch Strip
- 2.4 A-H Buttons
- 2.5 Knobs 1-8
- 2.6 Navigation Buttons
- 2.7 Transport Buttons
- 2.8 Screen Controls
- 2.8.1 Instrument Mode
- 2.8.2 Song Mode
- 2.8.3 Editor Modes
- 2.8.4 User Mode
- 3 Advanced Studio One Integration
- 3.1 Controls
- 3.1.1 Pad Controllers
- 3.1.2 Touch Strip
- 3.1.3 A-H Buttons
- 3.1.4 Encoders
- 3.1.5 Navigation Buttons
- 3.1.6 Transport Buttons
- 3.1.7 Global Controls
- 3.2 Screen Controls
- 3.2.1 Instrument Mode
- 3.2.2 Song Mode
- 3.2.3 Editor Modes
- 3.2.4 User Mode
- 4 Advanced Ableton Live Integration
- 4.1 Control Functions
- 4.1.1 RGB Colors
- 4.1.2 Triggering Notes or Clips
- 4.1.3 Plus and Minus Pads
- 4.1.4 Touch Strip
- 4.1.5 A-H Buttons
- 4.1.6 Knobs 1-8
- 4.1.7 Navigation Buttons
- 4.1.8 Transport Buttons
- 4.2 Screen Controls
- 4.2.1 Instrument Mode
- 4.2.2 Song Mode
- 4.2.3 Editor Mode
- 4.2.4 User Mode
- 5 Studio One Artist Quick Start
- 5.1 Installation and Authorization
- 5.2 Setting Up Studio One
- 5.2.1 Configuring Audio Devices
- 5.2.2 Configuring MIDI Devices
- 5.3 Creating a New Song
- 5.3.1 Configuring Your Audio I/O
- 5.3.2 Creating Audio and Instrument Tracks
- 5.3.3 Recording an Audio Track
- 5.3.4 Adding Virtual Instruments and Effects
8
2 Standard Controller Mode
2.7 Transport Buttons
ATOM SQ
Owner’s Manual
2.7 Transport Buttons
While in MCU and HUI modes, these are dedicated transport buttons.
Some buttons have a primary and secondary command when Shift is held
at the same time. In MIDI Mode, these buttons are freely assignable.
MCU/HUI mode
• Stop. Stops the transport from playing.
• Shift + Stop. Undo the last command or action.
This is not available in all software.
• Play. Starts the transport from the point of the playhead.
• Shift + Play. Enables or disables Loop.
• Record. Begins recording from the point of the
playhead. This is not available in all software.
• Shift + Record. Saves the current song. This is not available in all software.
• Metronome. Enables or disables the Metronome.
This is not available in all software.
2.8 Screen Controls
ATOM SQ’s screen functions use a paging system to accommodate many different
commands and controls. The Page Left and Page Right buttons below the
Screen Encoder will page through multiple screen commands, if available.
Power User Tip: To quickly jump back to the first page, press the mode button a
second time.
Press a screen button to select a function or enable/disable it. Use the
Screen Encoder to change the selected screen parameter value.
2.8.1 Instrument Mode
Instrument mode will change the screen to display functions used to control a virtual
instrument and to access the Arpeggiator Mode built into the ATOM SQ firmware.
2.8.1.1 Pad Configuration
Pad Configuration
Pads
Key
Range
0
Octave
+3
Chrom
Scale
C
Root
All
Velocity
1 2 3
4 5
6
1. Pads. When selected, the Screen Encoder will change
how the layout of the pads appear: