User Manual
1212
Central Station Plus3 Calibration
3.3 Calibrating Speaker Levels
1212
Central Station Plus
12
10. If you are calibrating a monitoring system with independent subwoofer
level control (such as a 2.1 or 2-way speaker system), repeat steps
4 to 9 for the subwoofer level. Repeat steps 1 through 10 for the
monitoring systems connected to Speaker Outputs B and C.
11. Test: Play audio through Speaker A only. Without adjusting any of the Central
Station’s levels, toggle Speaker A o and Speaker B on. You may hear a slight
tonal variation due to the dierent acoustic properties of the monitoring
systems, but the loudness should remain the same. If the loudness varies
drastically, you may wish to repeat this calibration procedure from step 1.