User Manual

2020
Central Station Plus5 Controls and Connections
5.2 Back Panel Layout
5.2.5 Analog Inputs
These inputs are for your audio sources (mixer, audio interface,
CD player, etc.). Only balanced cables should be used
when connecting the balanced TRS inputs of your Central
Station to these devices. Because of the Central Station’s
passive circuitry, using unbalanced cables can reduce the
output level and can introduce noise into your system.
• TRS 1 (L/R). Left and right, line-level, balanced ¼” TRS inputs.
• TRS 2 (L/R). Left and right, line-level, balanced ¼” TRS inputs.
• AUX (L/R). Left and right, line-level, unbalanced RCA TS inputs.
5.2.6 Console Remote Control
• Activate button. Activates optional CSR-1 remote
control. When the Activate button is depressed, the Main
Level control on the Central Station is bypassed.
• Console Remote Connection. This proprietary DB15 15-pin
connector is for the optional CSR-1 Central Station remote control.
See Section 5.3 for complete instructions.
5.2.7 Talkback Section
• Pedal. Unbalanced ¼” TS connector for use
with a momentary footswitch.
• Activate button. Activates the external microphone input
to be the source for the Talkback system and bypasses
the onboard Central Station microphone. Please note: the
onboard CSR-1 microphone is always active regardless
of whether or not the external mic is activated.
• External Microphone Input. This XLR connector feeds
an onboard microphone preamp for use with an external
Talkback mic. This preamp does not supply phantom
power so only dynamic microphones can be used.
POWER
12-18VDC
10Watts
POWER
12-18VDC
10Watts
POWER
12-18VDC
10Watts