User Manual

Owner’s Manual
Table of Contents
INTRODUCTION — 1
1.0 Getting Started — 2
1.1 Connect Power — 2
1.2 Connect Input Sources — 2
1.3 Connect the CSR-1 to Your
Central Station — 3
1.4 Connecting Monitor Speakers — 3
1.5 Using the Digital Input — 4
1.6 Using the Headphones and
Talkback System — 5
2.0 Overview — 6
2.1 What’s In the Box — 6
2.2 Features — 7
2.2.1 Summary of Features — 7
3.0 Calibrating Your
Central Station — 8
3.1 Calibrating the Meter — 8
3.2 Calibrating the Input Sources — 8
3.3 Calibrating Speaker Levels — 9
3.3.1 Maximum Loudness
Reference — 10
3.3.2 85 dB SPL Standard
Reference — 11
4.0 Sample Hookup
Diagrams — 13
4.1 Separate Control Room
and Recording Room — 13
4.2 Mixdown / Mastering Setup — 15
PART II: REFERENCE — 16
5.0 Controls and
Connections — 16
5.1 Front Panel Layout — 16
5.1.1 Talkback — 16
5.1.2 Headphones — 16
5.1.3 Cue/Main Select — 17
5.1.4 Meter — 17
5.1.5 Passive Speaker Control — 18
5.2 Back Panel Layout — 18
5.2.1 Power — 18
5.2.2 Digital Inputs
(24-bit/192 kHz) — 19
5.2.3 Speaker Outputs L/R
(A, B, and C) — 19
5.2.4 Line Outputs — 19
5.2.5 Analog Inputs — 20
5.2.6 Console Remote Control — 20
5.2.7 Talkback Section — 20
5.3 CSR-1: Central Station
Remote (optional) — 21
5.3.1 CSR-1 Controls — 21
6.0 Technical Information — 22
6.1 Frequently Asked Questions — 22
6.2 Troubleshooting — 23
6.3 Specications — 24
6.4 Block Diagram — 27
6.5 Remote DB15 Cable Pin-out — 28
6.6 PRESONUS LIMITED WARRANTY — 29